CWI CWI Facility Management & Operations

Question 1

Which organization provides the primary standards for indoor climbing wall operations and route setting in the United States?

Accepted Answer

CWA (Climbing Wall Association)

Answer

UIAA (International Climbing and Mountaineering Federation)

Answer

AMGA (American Mountain Guides Association)

Answer

OSHA (Occupational Safety and Health Administration)

Question 2

How often should the primary structural elements (anchors, T-nuts, wall panels) of a climbing wall be formally inspected according to best industry practice?

Accepted Answer

At least annually by a qualified inspector, with ongoing daily visual checks by staff

Answer

Once at installation only

Answer

Every five years by the manufacturer

Answer

Only after a reported incident or fall

Question 3

What is the primary hazard associated with a loose or stripped T-nut on a climbing wall hold?

Accepted Answer

Hold detachment under load, creating a fall hazard for the climber

Answer

Increased difficulty of the climbing route

Answer

Reduced aesthetic appearance of the wall

Answer

Interference with the auto-belay system

Question 4

When establishing a bouldering area floor padding specification, what ASTM standard applies to the impact attenuation of crash pads used in US indoor facilities?

Accepted Answer

ASTM F1292 — impact attenuation for playground surfacing

Answer

ASTM D5034 — breaking strength of textiles

Answer

ASTM F2291 — design of amusement rides

Answer

ASTM E84 — surface burning characteristics

Question 5

Which of the following is the correct procedure when a CWI discovers a damaged auto-belay device during a pre-opening inspection?

Accepted Answer

Tag the unit out of service, rope it off, and notify the facility manager before opening that station

Answer

Continue operations and schedule repair for after closing

Answer

Allow only experienced climbers to use the unit

Answer

Place a verbal warning at the base of the route

Question 6

What information must be included on a climbing wall facility's liability waiver to be considered enforceable in most US states?

Accepted Answer

Clear description of inherent risks, an assumption of risk clause, and a release of liability — signed and dated by the participant

Answer

Only the climber's name and signature date

Answer

A photograph of the climber

Answer

Only the emergency contact information