CTSP Tree Climbing and Rigging Safety Flashcards
6 cards from real CTSP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CTSP Tree Climbing and Rigging Safety flashcards as text
How frequently must climbing equipment be inspected according to ANSI Z133 best practices?
Answer: Before each use by the climber
Climbing equipment must be inspected before each use to identify wear, damage, or defects that could compromise safety.
What is the purpose of a redirect in a tree climbing system?
Answer: To change the direction of the climbing line to improve the climber's position
A redirect changes the direction of the climbing line, allowing the climber to maneuver more effectively and safely within the canopy.
Per ANSI Z133, why is a secondary attachment system required for all tree climbing operations?
Answer: So that if the primary attachment fails the climber is still protected from a fall
ANSI Z133 mandates a secondary attachment to provide redundancy so that failure of the primary system does not result in a fall.
Weight ratings for climbing saddles used in tree care are determined by which of the following?
Answer: The specific manufacturer's stated capacity for that model
Weight ratings for climbing saddles vary by model and must be determined from the manufacturer's specifications for that specific equipment.
What does 'body-to-work' positioning describe in tree climbing practice?
Answer: Positioning so the work is between the climber and the attachment point
'Body-to-work' means positioning the work between the climber and their attachment point, providing maximum stability and control.
What is the minimum number of full wraps typically required when tying a Prusik knot for climbing use?
Answer: 3 full wraps
A Prusik knot requires a minimum of 3 full wraps to generate sufficient friction for reliable climbing use.