CTS AV Site Surveys

Question 1

What is the primary purpose of conducting an AV site survey before system design?

Accepted Answer

To gather existing conditions, constraints, and client requirements that will drive system design

Answer

To install temporary AV equipment for the client to evaluate

Answer

To determine the final cost of all AV equipment purchases

Answer

To present the completed system design to stakeholders

Question 2

Which measurement is most critical to document when surveying a room intended for a rear-projection display system?

Accepted Answer

The throw distance available behind the screen wall

Answer

The ambient light color temperature of the space

Answer

The height of the room's HVAC return vents

Answer

The number of electrical outlets on the front wall

Question 3

During an AV site survey, you notice the ceiling height in the conference room is only 2.4 m (8 ft). How does this most directly affect display placement planning?

Accepted Answer

It limits the maximum mounting height and may restrict the size of displays that can be installed while maintaining acceptable viewing angles

Answer

It eliminates the need to consider rear-projection as an option

Answer

It requires the use of ultra-short-throw projectors exclusively

Answer

It has no effect because display height is determined only by seating layout

Question 4

What document is typically produced as the deliverable of an AV site survey?

Accepted Answer

A site survey report containing annotated floor plans, photographs, measurements, and notes on existing infrastructure

Answer

A signed contract authorizing the AV installation to proceed

Answer

A completed bill of materials listing all equipment to be purchased

Answer

A programming document detailing control system logic

Question 5

When surveying an existing room for a new AV system, which electrical factor is most important to verify?

Accepted Answer

Available circuit capacity and dedicated circuit availability near equipment locations

Answer

The brand of electrical panels installed in the building

Answer

Whether the building uses aluminum or copper branch circuit wiring

Answer

The color coding used on the existing outlet faceplates

Question 6

You are surveying a large auditorium and need to assess the acoustic environment. Which observation is most relevant to note for loudspeaker system design?

Accepted Answer

Estimated reverberation time and presence of hard, reflective surfaces such as concrete walls or hard floors

Answer

The color and texture of the wall paint finish

Answer

The age of the building's original construction

Answer

The number of exit signs installed around the perimeter