CSWP - Certified Solidworks Professional Advanced Feature Modification Questions and Answers

Question 1

You are tasked with modifying a solid body to create a localized depression on its surface.
The shape of the depression must be controlled by pushing and pulling control points on a grid applied to the selected face.
Which SOLIDWORKS feature is best suited for this task?

Accepted Answer

Freeform

Answer

Deform

Answer

Indent

Answer

Flex

Question 2

A design requires creating a pocket in a 'Target Body' that perfectly matches the contour of a separate 'Tool Body'. The operation must also maintain a specific clearance between the two bodies. Which feature should be used to accomplish this in a multi-body part environment?

Accepted Answer

Indent

Answer

Combine - Subtract

Answer

Deform - Surface Push

Answer

Cavity

Question 3

When using the Flex feature to twist a cylindrical rod, what does the 360-degree angle input represent?

Accepted Answer

The total angular rotation of one trim plane relative to the other.

Answer

The angular rotation applied to each side of the triad, totaling 720 degrees.

Answer

The radius of the twist operation.

Answer

The final angle of the helical feature created on the surface.

Question 4

Which of the following scenarios is the MOST appropriate use case for the Deform feature with the 'Point' option?

Accepted Answer

Creating a dimple or small dome on a curved surface by selecting a single location.

Answer

Bending a flat bar into a U-shape.

Answer

Twisting a rectangular bar along its length.

Answer

Creating a pocket using a separate solid body as a tool.

Question 5

You need to apply a text-based logo onto a conical surface. The logo must be recessed into the part (debossed). Which feature allows you to wrap a sketch containing the text onto the non-planar surface and remove material?

Accepted Answer

Wrap

Answer

Project Curve

Answer

Split Line

Answer

Extruded Cut

Question 6

Which statement accurately describes a key difference between the Indent feature and the Deform feature?

Accepted Answer

Indent changes the number of faces, edges, and vertices on the target body, while Deform does not.

Answer

Deform can only be used on surface bodies, while Indent can only be used on solid bodies.

Answer

Indent requires the tool and target bodies to be merged, while Deform keeps them separate.

Answer

Deform can create a clearance between bodies, while Indent cannot.