CSWA - Certified Solidworks Associate Part Modification Features Questions and Answers

Question 1

A designer needs to add a taper to the vertical faces of a part that will be manufactured using injection molding. What is the primary purpose of applying a Draft feature in this scenario?

Accepted Answer

To allow for easy and damage-free ejection of the part from the mold.

Answer

To strengthen the part by adding reinforcing structures.

Answer

To hollow out the part, creating a uniform wall thickness.

Answer

To create smooth, rounded edges for improved aesthetics and safety.

Question 2

You need to create a simple, thin support structure between two vertical walls of a part. The most efficient method is to use the Rib feature. Which of the following is a key characteristic of creating a Rib?

Accepted Answer

It can be effectively created from a single, open-contour line sketch.

Answer

It requires two separate closed-profile sketches on different planes.

Answer

It requires a guide curve in addition to the primary sketch profile.

Answer

The sketch must be on a face that is parallel to the desired rib direction.

Question 3

To create an engraved effect for a logo on the curved surface of a bottle, you have created a sketch on a plane tangent to the bottle. Which feature and type should be used to remove material from the bottle's face following the sketch?

Accepted Answer

Wrap feature with the 'Deboss' option.

Answer

Wrap feature with the 'Emboss' option.

Answer

An Extruded Cut feature with the 'Offset from Surface' end condition.

Answer

Wrap feature with the 'Scribe' option.

Question 4

A designer wants to model the shared, overlapping volume between two intersecting solid bodies within a single part file. Which operation within the Combine feature should be used to achieve this result?

Accepted Answer

Common

Answer

Add

Answer

Subtract

Answer

Split

Question 5

You need to completely round the top of a rectangular block from one side to the other without specifying a radius value. Which is the most direct and robust method to achieve this?

Accepted Answer

Use a Full Round Fillet and select the two side faces and the top face.

Answer

Use a Variable Radius Fillet and set the end radii to half the block's width.

Answer

Use a Face Fillet and select the two top edges.

Answer

Measure the width, and apply a Constant Size Fillet with a radius of exactly half the width.

Question 6

When using the Chamfer feature, which set of inputs is required to create an 'Angle Distance' chamfer?

Accepted Answer

An edge, a face, a distance, and an angle.

Answer

A vertex and three distance values.

Answer

Two edges and an angle value.

Answer

An edge and two different distance values.

A designer needs to add a taper to the vertical faces of a part that will be manufactured using injection molding.What is the primary purpose of applying a Draft feature in this scenario?

A designer needs to add a taper to the vertical faces of a part that will be manufactured using injection molding.
What is the primary purpose of applying a Draft feature in this scenario?