Practice Test Geeks(CSS) Certified Security Supervisor Practice Test
← All CSS Flashcard Decks

Emergency Response & Crisis Management Flashcards

7 cards from real CSS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Emergency Response & Crisis Management flashcards as text

  1. The 'perimeter control' concept during a crisis event means:

    Answer: Establishing inner and outer boundaries to control access and protect the scene

    Perimeter control establishes inner (scene) and outer (public buffer) boundaries to manage access and protect the integrity of the incident scene.

  2. A business continuity plan (BCP) differs from an emergency response plan in that BCP focuses on:

    Answer: Maintaining or restoring critical operations after a disruption

    A BCP addresses how the organization continues essential functions and recovers operations following a disruptive event, beyond the immediate emergency.

  3. Which factor most commonly causes emergency response failures at the scene?

    Answer: Breakdown in communications among responders

    Communication breakdowns between responders are one of the most frequently cited causes of emergency response failures.

  4. A 'hot zone' in a hazmat incident is defined as:

    Answer: The area of highest contamination where only properly equipped personnel may enter

    The hot zone is the area of highest contamination or danger, accessible only to personnel with appropriate protective equipment.

  5. When writing an after-action report (AAR) following a crisis, a security supervisor should:

    Answer: Document both successes and areas for improvement with corrective actions

    An effective AAR captures what worked, what didn't, and specific corrective actions to improve future responses.

  6. The concept of 'span of control' in ICS recommends that one supervisor effectively manage no more than:

    Answer: 3 to 7 subordinates (optimally 5)

    ICS recommends a span of control of 3 to 7 subordinates, with 5 considered optimal for effective supervision.

  7. Which of the following is an example of a 'secondary device' threat that security supervisors must consider?

    Answer: An additional explosive device placed to target first responders at the scene of an initial blast

    Secondary devices are explosives or threats deliberately placed to injure first responders who arrive after an initial incident.