Practice Test Geeks(CSS) Certified Safety Supervisor Practice Test
← All CSS Flashcard Decks

OSHA Regulatory Compliance Flashcards

7 cards from real CSS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 OSHA Regulatory Compliance flashcards as text

  1. Under OSHA's Process Safety Management standard (29 CFR 1910.119), a Process Hazard Analysis (PHA) must be updated and revalidated at least every:

    Answer: 5 years

    OSHA's PSM standard requires that PHAs be updated and revalidated at least every five years to reflect current process conditions and any changes.

  2. An employer receives an OSHA citation and disagrees with it. What is the deadline for filing a Notice of Contest?

    Answer: 15 working days from receipt of the citation

    Employers must file a Notice of Contest with the OSHA Area Director within 15 working days of receiving a citation, or the citation becomes a final order.

  3. Under OSHA's Respiratory Protection standard (29 CFR 1910.134), a medical evaluation to determine respirator suitability must be provided to employees:

    Answer: Before they are fit tested or required to use a respirator

    OSHA requires a medical evaluation before an employee undergoes fit testing or is required to use a respirator to ensure they can safely wear one.

  4. OSHA's Permit-Required Confined Space standard (29 CFR 1910.146) requires that the atmosphere of a permit space be tested for which hazards in what order?

    Answer: Oxygen level, then flammable gases, then toxic contaminants

    OSHA specifies testing in the order of oxygen content first, flammable gases/vapors second, and potential toxic air contaminants third.

  5. Which OSHA regulation requires employers to develop and implement a written Emergency Action Plan (EAP) when they have more than 10 employees?

    Answer: 29 CFR 1910.38

    29 CFR 1910.38 requires a written Emergency Action Plan for employers with more than 10 employees; smaller employers may communicate the plan orally.

  6. Under OSHA's Walking-Working Surfaces standard (29 CFR 1910 Subpart D), what is the minimum guardrail height required for general industry?

    Answer: 42 inches

    OSHA's updated Walking-Working Surfaces standard requires guardrail systems to be 42 inches (plus or minus 3 inches) in height for general industry.

  7. OSHA's Occupational Noise Exposure standard (29 CFR 1910.95) requires employers to implement a Hearing Conservation Program when employee noise exposure equals or exceeds:

    Answer: 85 dBA as an 8-hour TWA

    The action level of 85 dBA as an 8-hour time-weighted average triggers the requirement for a hearing conservation program, including audiometric testing.