CSM Security Technology & Surveillance Systems Flashcards
6 cards from real CSM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CSM Security Technology & Surveillance Systems flashcards as text
What is the role of a Security Operations Center (SOC) in an enterprise security program?
Answer: To serve as the centralized hub for monitoring alarms, cameras, and coordinating security responses
A SOC is the nerve center of a security program, providing 24/7 monitoring of alarms, surveillance feeds, and communications to coordinate real-time incident response.
Which alarm system component is responsible for transmitting alarm signals from a protected site to a central monitoring station?
Answer: Control panel (alarm communicator)
The alarm control panel processes sensor inputs and uses a communicator (cellular, IP, or phone line) to transmit alarm signals to an off-site central monitoring station.
In security technology, what does 'IP camera' refer to?
Answer: A camera that transmits video over a network using Internet Protocol
An IP camera digitizes and transmits video over a TCP/IP network, enabling remote access, flexible placement, and integration with VMS platforms without dedicated coaxial cabling.
What is 'alarm fatigue' and why is it a concern for security managers?
Answer: Desensitization of security staff to alarms due to excessive false positives, leading to delayed or missed real incident responses
Alarm fatigue occurs when high false alarm rates cause staff to discount or delay responding to alarms, creating a dangerous gap where real threats may go unaddressed.
A security manager is evaluating a new access control system. Which factor is MOST important when assessing biometric system accuracy?
Answer: Equal Error Rate (EER) — the point where false acceptance rate equals false rejection rate
EER is the standard metric for biometric accuracy — the lower the EER, the more accurate the system at correctly identifying and rejecting users.
What is the purpose of 'tamper detection' features built into security sensors and control panels?
Answer: To detect unauthorized attempts to disable, remove, or modify the security device itself
Tamper detection triggers an alert when someone attempts to open, remove, or interfere with a security device, providing a meta-layer of protection for the security system itself.