Quality Assurance Requirements Flashcards
7 cards from real CSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Assurance Requirements flashcards as text
A specification requires concrete compressive strength testing at 7 days and 28 days. How many cylinders per set does ASTM C31 typically require for standard acceptance testing?
Answer: 3 cylinders
ASTM C31 standard practice typically requires a minimum of three test cylinders per set for standard acceptance testing of concrete compressive strength.
Under CSI Section 01 40 00, what is the purpose of requiring the contractor to maintain a 'quality control plan'?
Answer: To establish a systematic approach for ensuring work conforms to contract requirements
A contractor's quality control plan establishes the systematic procedures, responsibilities, and activities the contractor will use to ensure conformance with contract requirements.
What is the role of a 'Statements of Qualifications' (SOQ) in quality assurance specifications?
Answer: To demonstrate that a contractor, subcontractor, or installer meets experience and competency requirements
A Statement of Qualifications demonstrates that the entity has the required experience, expertise, certifications, and resources to perform specified work.
Which term describes the owner's right to inspect work at any stage of construction, even if the work will be subsequently concealed?
Answer: Inspection hold point
An inspection hold point is a mandatory stop in the construction process where the owner or their representative must inspect and approve work before it can be covered or proceed.
In the CSI three-part specification format, where are quality assurance requirements for a product section typically located?
Answer: Part 1 – General
Quality assurance requirements, including qualifications, regulatory requirements, and mock-up requirements, are placed in Part 1 – General of a three-part specification section.
A specification states that roofing installer must be 'certified by the membrane manufacturer.' This requirement is an example of:
Answer: Installer qualification requirement
Requiring installer certification by the manufacturer is an installer qualification requirement, ensuring the applicator has manufacturer-approved training and expertise.
What distinguishes a 'test report' from a 'certificate of compliance' as quality assurance documentation?
Answer: A test report documents actual measured test results; a certificate is a written statement affirming conformance without detailed test data
A test report contains actual measured data from laboratory or field tests, while a certificate of compliance is a manufacturer's or installer's written affirmation that requirements have been met.