Practice Test Geeks(CSI) Construction Specifications Institute Certification Practice Test
← All CSI Flashcard Decks

Mixed Deck — All CSI Topics Flashcards

100 cards from real CSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 20 Mixed Deck — All CSI Topics flashcards as text

  1. Which MasterFormat division encompasses Electrical work?

    Answer: Division 26

    Division 26 covers Electrical systems including wiring, lighting, and power distribution.

  2. What is the purpose of a pre-bid conference in the procurement process?

    Answer: To allow bidders to clarify ambiguities in the bidding documents

    Pre-bid conferences give prospective bidders the opportunity to ask questions and receive clarifications about the project scope and documents.

  3. A project's 'Conveying Systems' (elevators, escalators) are classified under which UniFormat Level 2 group?

    Answer: D10

    D10 – Conveying Systems covers vertical transportation equipment including elevators, escalators, and lifts.

  4. In UniFormat & Elemental Classification, what is the FIRST step a CSI professional should take when encountering a new case or situation?

    Answer: Conduct a comprehensive assessment and gather all relevant information

    In UniFormat & Elemental Classification, a thorough initial assessment ensures all relevant factors are identified before deciding on an appropriate course of action. This systematic approach is fundamental to Construction Specifications Institute practice.

  5. Under Design-Build, the 'bridging' approach involves the owner hiring a designer to:

    Answer: Develop partial design criteria documents that the design-builder then completes

    Bridging uses an owner's criteria designer to develop schematic or design development documents that define requirements, which the design-builder then uses to complete the design and construct the project.

  6. Which AIA document is specifically tailored for Sustainable Projects incorporating LEED or similar rating systems?

    Answer: AIA E204

    AIA E204 is the Sustainable Projects Exhibit, used as an attachment to other agreements to address sustainable design and construction responsibilities.

  7. What does the term 'responsive bid' mean in competitive bidding?

    Answer: A bid submitted before the deadline with all required documents

    A responsive bid complies with all procedural requirements of the bidding documents, including timely submission and required attachments.

  8. What is the function of the 'bid tabulation' prepared after a bid opening?

    Answer: It lists all bids received for comparison and award recommendation

    A bid tabulation organizes and compares all received bids in a structured format to facilitate transparent award decisions.

  9. What is 'commissioning' in the context of sustainable building specifications?

    Answer: A systematic process to verify building systems perform as intended per the owner's project requirements

    Commissioning is a quality-focused process that verifies and documents that all building systems are planned, designed, installed, and operated per the Owner's Project Requirements (OPR).

  10. When applying UniFormat to a renovation project, selective demolition of interior partitions would be classified under:

    Answer: F20 – Selective Demolition

    F20 – Selective Demolition in Group F covers demolition of existing building elements, distinct from site clearing under G10.

  11. In a UniFormat elemental cost model, 'shell cost' would aggregate costs from which elements?

    Answer: B10, B20, B30

    Shell cost aggregates Superstructure (B10), Exterior Enclosure (B20), and Roofing (B30)—all Level 2 elements under Group B.

  12. What is the key advantage of using glass fiber reinforced concrete (GFRC) for architectural cladding panels?

    Answer: It achieves high strength at significantly reduced panel weight

    GFRC panels achieve compressive strengths comparable to conventional concrete but at roughly one-quarter the weight, enabling thinner, lighter cladding panels.

  13. Which of the following best describes 'substantial completion' under standard AIA contract terms?

    Answer: The stage when the Work is sufficiently complete for the owner's intended use

    Substantial Completion occurs when the Work is sufficiently complete so the owner can occupy or use it for its intended purpose.

  14. Which provision in AIA A201-2017 addresses the Contractor's right to stop work for non-payment?

    Answer: §9.7

    A201-2017 §9.7 allows the Contractor to stop work if the Owner fails to make payment within the required time.

  15. Site utilities such as water supply, sanitary sewer, and storm drainage on a project site are classified under which UniFormat Level 2 group?

    Answer: G30 – Site Civil/Mechanical Utilities

    G30 – Site Civil/Mechanical Utilities covers water supply, sanitary sewer, storm drainage, and fuel distribution systems on the building site.

  16. How does continuing education relate to safety regulations & osha compliance for CSI certified professionals?

    Answer: It ensures professionals stay current with evolving standards and best practices

    Continuing education ensures CSI professionals stay current with evolving standards, technologies, and best practices in safety regulations & osha compliance, maintaining competency throughout their careers.

  17. What is the role of a specification writer?

    Answer: Writes material and workmanship requirements

    The specification writer prepares detailed written instructions regarding materials and workmanship.

  18. Which project delivery method is most closely associated with a single point of responsibility for both design and construction?

    Answer: Design-Build (DB)

    In Design-Build, a single entity holds contracts for both design and construction services, creating one point of responsibility for the owner.

  19. A specification section requires 'Special Inspection' per IBC Chapter 17. Who is responsible for employing the special inspector?

    Answer: The owner or owner's representative

    Per IBC Chapter 17, the owner or the registered design professional in responsible charge employs the approved special inspector.

  20. A substitution request includes test data showing the proposed product meets 90% of the specified performance value. Under standard CSI practice, the architect should:

    Answer: Reject it because it does not fully meet the specification

    Products that do not fully meet specified performance requirements are not equivalent substitutions and should be rejected unless the specification explicitly allows a lower threshold.