Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

Rotating Equipment and Rocking Equipment Standards Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Rotating Equipment and Rocking Equipment Standards flashcards as text

  1. According to CPSC guidelines, what is the minimum use zone distance required around rotating equipment such as merry-go-rounds?

    Answer: 6 feet in all directions

    CPSC guidelines require a minimum use zone of 6 feet in all directions from the outermost edge of rotating equipment.

  2. What is the maximum height of the seat or designated play surface on a spring rocker, per CPSC public playground guidelines?

    Answer: 18 inches above protective surfacing

    CPSC guidelines specify that the seat or designated play surface of a spring rocker must not exceed 18 inches above the protective surfacing.

  3. Spring rockers on public playgrounds are primarily designed for which age group?

    Answer: 2–5 years

    Spring rockers are designed for children ages 2–5 years because they are low to the ground and appropriate for toddler-sized users.

  4. Which specific entrapment hazard is most associated with the mechanical component of spring rockers?

    Answer: Limb entrapment in the spring mechanism

    The coil or spring mechanism of spring rockers can trap children's fingers, hands, or feet, creating a limb entrapment hazard.

  5. What design feature should seesaws incorporate to prevent impact injuries when the occupied seat strikes the ground?

    Answer: Energy-absorbing material beneath each seat

    Seesaws should have energy-absorbing material (such as rubber bump stops) under each seat to cushion the impact when the seat descends rapidly.

  6. According to ASTM F1487, which safety feature is required on merry-go-rounds to reduce fall injuries to occupants?

    Answer: Accessible handholds for all occupants

    ASTM F1487 requires merry-go-rounds to provide handholds that are accessible to all occupants to prevent falls during rotation.

  7. What is the primary concern a CPSI inspector focuses on when examining the pivot point of a seesaw?

    Answer: Excessive wear or looseness in the pivot bearing

    Excessive wear or looseness in the pivot bearing creates unpredictable movement and increases injury risk, making it the priority inspection point on a seesaw.