Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

Climbers and Upper Body Equipment Standards Questions and Answers Flashcards

6 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Climbers and Upper Body Equipment Standards Questions and Answers flashcards as text

  1. A CPSI inspects a rope climber and finds a mesh opening of 5 inches. What standard applies and what is the finding?

    Answer: ASTM F3101 — the 5-inch opening falls in the head entrapment zone (3.5 to 9 inches) and is a hazard

    ASTM F3101 governs net and rope structures, and a 5-inch mesh opening falls within the 3.5-to-9-inch head entrapment zone, making it a serious hazard.

  2. What does ASTM F1487 require regarding the load-bearing capacity testing of climbing equipment?

    Answer: Equipment must meet structural performance requirements including static and dynamic load testing

    ASTM F1487 requires climbing equipment to meet structural performance requirements including both static load testing (concentrated and distributed loads) and dynamic load testing.

  3. What is the acceptable maximum gap around a handhold or foothold installed on a climbing structure wall that could trap fingers?

    Answer: Less than 3/8 inch or greater than 1 inch

    Finger entrapment hazards exist for gaps between 3/8 inch and 1 inch; spaces must be either less than 3/8 inch or greater than 1 inch to avoid trapping fingers.

  4. When inspecting a rock climbing wall, a CPSI notices that several handholds have become loose. What is the primary concern?

    Answer: Structural hazard — a child could fall when relying on a loose handhold, and loose hardware can create protrusion hazards

    Loose handholds are a structural hazard — they can fail when a climbing child relies on them, causing falls, and loose hardware creates protrusion and sharp edge hazards.

  5. What does ASTM F1487 specify about the clearance zone below overhead ladder equipment?

    Answer: A minimum 7-foot clearance below the equipment must be maintained free of obstructions

    ASTM F1487 requires a minimum 7-foot clearance zone below overhead climbing equipment to allow children to fall and land without striking structural elements.

  6. A CPSI evaluates a climbing net that has frayed rope segments. What standard applies and what recommendation should be made?

    Answer: ASTM F3101 — inspect all ropes for structural integrity and recommend replacement of frayed segments before the playground reopens

    ASTM F3101 governs rope and net structures, and frayed ropes represent a structural integrity hazard requiring replacement before continued use.