Climbers and Upper Body Equipment Standards Flashcards
7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Climbers and Upper Body Equipment Standards flashcards as text
During a post-installation inspection of a new arch climber, you notice the foundation anchors are not fully grouted. What action is required?
Answer: Remove from service until anchor installation is completed to manufacturer specifications
Incomplete anchor installation is a structural deficiency requiring the equipment to be removed from service until corrected per manufacturer specifications.
What is the primary age-group distinction when determining appropriate rung spacing and height of overhead ladders on a playground?
Answer: Preschool (2-5) vs. school-age (5-12)
ASTM F1487 distinguishes design requirements between preschool (2–5 years) and school-age (5–12 years) children for overhead equipment dimensions.
A chin-up bar is installed at 60 inches for school-age children. A child hanging at full extension can touch the ground with their feet. What should the inspector document?
Answer: The bar height is insufficient for school-age children and presents a misuse/fall risk
A chin-up bar too low for the intended age group allows users to push off the ground improperly and may not provide developmental benefit, constituting a design deficiency.
On a cable ride (zipline-style upper body traverse), what is the most critical measurement the inspector must verify at the landing end?
Answer: The height of the handle at the landing zone to prevent collision injuries
At the landing end of a cable ride, the handle height must be positioned to prevent a child from colliding with the landing structure or ground at speed.
A playground inspection reveals a metal arch climber with visible surface rust on structural members. How should the inspector classify this finding?
Answer: Maintenance item requiring assessment of whether corrosion is surface-only or has compromised structural integrity
Surface rust must be assessed to determine if it is cosmetic or has compromised structural integrity before classifying severity and required action.
What is the purpose of entrapment testing templates (go/no-go gauges) used during a CPSI inspection of climbers?
Answer: To check whether openings fall within hazardous head, neck, or foot entrapment ranges
Go/no-go gauges allow inspectors to quickly determine whether openings in equipment fall within the hazardous entrapment size ranges per ASTM F1487.
A climbing net has a maximum mesh opening that measures 8.5 inches diagonally. What is the inspector's determination?
Answer: Hazardous — falls within the 3.5-to-9-inch head entrapment zone
An 8.5-inch opening falls within the 3.5-to-9-inch prohibited range for head entrapment, making it a hazardous condition requiring correction.