Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

ASTM and CPSC Standards Questions and Answers Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 ASTM and CPSC Standards Questions and Answers flashcards as text

  1. According to ASTM F1292, what property does the standard measure to assess the impact attenuation of playground surfacing materials?

    Answer: HIC (Head Injury Criterion)

    ASTM F1292 measures the Head Injury Criterion (HIC) value to evaluate whether a surfacing material adequately attenuates impact forces.

  2. The CPSC Handbook for Public Playground Safety recommends that the use zone for a single-axis swing extend in front of and behind the seat by at least how many times the height of the pivot point?

    Answer: 2 times

    The CPSC Handbook specifies that the use zone for swings must extend at least twice the height of the pivot point in front of and behind the seat.

  3. Under ASTM F1487, which of the following is considered an 'entrapment' hazard on playground equipment?

    Answer: An opening between 3.5 and 9 inches

    ASTM F1487 identifies openings between 3.5 and 9 inches as head entrapment hazards because a child's body may pass through while the head cannot.

  4. ASTM F1292 requires that loose-fill surfacing materials be tested at what two conditions to establish certified fall height performance?

    Answer: New and aged/compacted

    ASTM F1292 requires testing surfacing both in new/uncompacted and aged/compacted states because compaction significantly reduces impact attenuation.

  5. According to CPSC guidelines, what is the minimum depth of loose-fill wood chips or bark required to provide adequate protection for a fall from a height of 7 feet?

    Answer: 12 inches

    CPSC guidelines recommend at least 12 inches of loose-fill wood chips or bark to adequately attenuate impact from a 7-foot fall height.

  6. Which ASTM standard specifically addresses the safety performance specifications for impact-attenuating surfacing used beneath playground equipment?

    Answer: ASTM F1292

    ASTM F1292 is the standard that establishes impact attenuation performance requirements for playground surfacing materials.

  7. Under ASTM F1487, what is the maximum permissible angle from vertical for a protrusion on playground equipment before it constitutes an impalement hazard?

    Answer: 45 degrees

    ASTM F1487 considers protrusions that angle 45 degrees or more from vertical, combined with sufficient projection, as potential impalement hazards.