Practice Test GeeksCPSI - Certified Playground Safety Inspector Practice Test
← All CPSI Flashcard Decks

ASTM and CPSC Standards Flashcards

7 cards from real CPSI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 ASTM and CPSC Standards flashcards as text

  1. Under ASTM F1487, what is the minimum height for a protective barrier on equipment designed for children ages 5-12 where the platform is more than 30 inches above the protective surface?

    Answer: 38 inches

    ASTM F1487 requires protective barriers on equipment for ages 5-12 with platforms over 30 inches high to be at least 38 inches tall.

  2. The CPSC Handbook recommends that the use zone for a tot swing extend how far in front of and behind the pivot point?

    Answer: Twice the height of the pivot point

    The CPSC recommends the use zone for swings extend twice the height of the pivot point both in front of and behind the swing.

  3. According to ASTM F1487, which type of hardware finish is specifically recommended to minimize corrosion on outdoor playground equipment?

    Answer: Hot-dip galvanized or stainless steel

    ASTM F1487 recommends hot-dip galvanized or stainless steel hardware for outdoor equipment due to superior corrosion resistance.

  4. ASTM F2049 is the standard that covers which specific playground component?

    Answer: Swing hangers and connectors

    ASTM F2049 covers the safety of hangers and connectors used in conjunction with swings for home playground equipment.

  5. According to the CPSC Handbook, what action should a playground inspector take upon discovering an imminent hazard during an inspection?

    Answer: Close the equipment immediately and notify the responsible authority

    An imminent hazard requires immediate closure of the affected equipment and prompt notification to those responsible for the playground.

  6. Under ASTM F1487, what is the maximum gap allowable between a ladder rung and a supporting structure to prevent foot entrapment?

    Answer: Less than 3.5 inches or greater than 9 inches

    ASTM F1487 requires ladder rung gaps to be either less than 3.5 inches or greater than 9 inches to avoid the foot entrapment zone.

  7. The CPSC Handbook identifies 'protrusions' as a hazard because they can cause which type of injury?

    Answer: Impalement or clothing entanglement leading to strangulation

    Protrusions such as bolt ends or S-hooks can catch clothing, creating strangulation hazards, or can directly impale a child.