Inspection Procedures & Techniques Flashcards
7 cards from real CPI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection Procedures & Techniques flashcards as text
When inspecting a roof from the ground level only due to safety concerns, what must the inspector do?
Answer: Note in the report that a ground-level inspection was performed and recommend further evaluation
Inspectors must disclose the scope limitation and recommend further evaluation by a specialist when a full roof inspection cannot be performed.
Which condition would most likely cause an inspector to defer a garage door safety reverse test?
Answer: The door panels are visibly cracked and could shatter on contact
An inspector should not perform the reverse test if door panels are visibly compromised, as the test could cause injury or further damage.
When inspecting a crawl space with standing water, the inspector should:
Answer: Note the condition, inspect as much as safely accessible, and recommend further evaluation
The inspector documents the accessible portion, notes the unsafe condition, and recommends a specialist for areas not safely reached.
What is the primary purpose of operating a representative sample of windows during a home inspection?
Answer: To verify operability, locking function, and condition of hardware
Testing a representative sample of windows confirms they open, close, lock properly, and that hardware is functional.
An inspector discovers an actively sparking electrical panel during an inspection. The correct action is to:
Answer: Immediately notify the client and vacate until the utility company deactivates power
An actively sparking panel is an immediate safety hazard requiring evacuation and utility notification before any further inspection.
When should an inspector test a sump pump during an inspection?
Answer: By pouring water into the pit to trigger the float switch, if the pump is accessible and power is on
Inspectors test sump pumps by triggering the float switch with water when the unit is accessible and power is available.
Which technique is used to identify potential moisture intrusion behind wall surfaces without invasive probing?
Answer: Thermal imaging or moisture meter scanning of wall surfaces
Thermal cameras and moisture meters are non-invasive tools that can detect moisture anomalies behind finished wall surfaces.