← All CPI Flashcard Decks

State & Local Health Codes Flashcards

7 cards from real CPI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 State & Local Health Codes flashcards as text
  1. A state health code requires cyanuric acid (CYA) levels not to exceed 100 ppm in public pools. An inspector measures 130 ppm. What must the operator do?

    Answer: Partially drain and refill the pool to dilute CYA

    Excessive CYA reduces chlorine effectiveness; the standard corrective action under health codes is partial drain-and-refill to dilute the stabilizer.

  2. Which of the following is typically NOT required to be included in a state pool operating permit application?

    Answer: Detailed biography of all lifeguards

    Permit applications require technical and operational details about the pool, not personal biographical information about individual staff members.

  3. Under most state health codes, at what minimum frequency must a public pool operator test free chlorine and pH?

    Answer: At least twice daily

    Most state health codes require public pools to test free chlorine and pH at least twice daily, typically before opening and midday.

  4. A state health inspector issues a Notice of Violation (NOV) for a public pool. What is the typical immediate consequence for the pool operator?

    Answer: The pool may be ordered closed pending correction and re-inspection

    An NOV typically triggers a correction deadline and may include a closure order, with reopening contingent on a satisfactory follow-up inspection.

  5. Which of the following pool features typically requires its own separate health code approval or permit in most states?

    Answer: A water slide or flume ride

    Water slides and flume rides are typically classified as special aquatic features requiring separate permits and compliance with additional safety codes.

  6. Under state health codes, which of the following best describes when a 'bather load' limit is established for a public pool?

    Answer: Based on pool surface area and/or volume with a defined formula

    Bather load limits are calculated using pool surface area and/or volume formulas defined in state health codes to ensure adequate water quality per bather.

  7. A public pool's state license expired 10 days ago but the operator continues to allow swimmers. Under health code enforcement, this constitutes:

    Answer: Operating without a valid permit — a citable violation

    Operating a public pool without a valid, current permit is a direct health code violation regardless of when the application was submitted.