State & Local Health Codes Flashcards

Under most state health codes, what is the minimum required turnover rate for a public swimming pool?

Answer: Every 6 hours

Most state health codes require public pool water to turn over (be fully filtered) at least once every 6 hours.

Which agency typically has primary authority to enforce pool and spa health codes at the local level?

Answer: Local health department

Local health departments are typically the primary enforcement authority for pool and spa sanitation codes.

When a state health code conflicts with a local ordinance on pool safety fencing, which generally takes precedence?

Answer: The local code prevails if it is more restrictive

Local jurisdictions may adopt more restrictive standards than the state, and the more protective local requirement generally governs.

A CPI inspector finds a public pool operating without a current permit. What is the correct course of action?

Answer: Document and report to the local health authority

The inspector should document the violation and report it to the appropriate health authority, who has enforcement power.

State health codes typically require that pool chemical records be retained for a minimum of how long?

Answer: 1 year

Most state codes require chemical testing and treatment logs to be kept for at least one year and made available for inspection.

Which of the following best describes the Model Aquatic Health Code (MAHC)?

Answer: A voluntary guidance document states can adopt as a basis for regulations

The MAHC is a voluntary CDC-developed guidance document that states and localities may adopt or reference when writing their own pool health codes.

Under most state health codes, a public spa (hot tub) must not exceed what maximum water temperature?

Answer: 104°F (40°C)

Most state codes set a maximum spa water temperature of 104°F (40°C) to prevent hyperthermia.