CPI Spa & Hot Tub Specific Requirements Flashcards
6 cards from real CPI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CPI Spa & Hot Tub Specific Requirements flashcards as text
What is the typical minimum turnover rate requirement for a public spa?
Answer: Every 30 minutes
Most state codes require spa water to turn over completely every 30 minutes due to the high bather-to-water-volume ratio.
What suction fitting requirement specifically applies to spas to prevent hair entrapment?
Answer: Suction outlets must meet ANSI/APSP-16 entrapment protection standards
All spa suction outlets must comply with ANSI/APSP-16 to provide certified entrapment protection for hair and body.
What minimum bather load restriction is typically posted for public spas?
Answer: Occupancy is set based on seating positions or square footage per code
Occupancy limits for public spas are set by state/local code, typically based on available seating positions or a defined square footage formula.
During a CPI inspection, what should an inspector check regarding a spa's skimmer?
Answer: Presence, condition, and correct flow rate of the skimmer
The inspector must verify the skimmer is present, undamaged, and that flow through it falls within the manufacturer's rated range.
What is the role of a thermal cover (hard cover) on a spa when it is not in use?
Answer: Prevents heat loss, evaporation, and unauthorized access
A thermal hard cover conserves heat, reduces chemical evaporation, and helps restrict unsupervised access when the spa is closed.
What is the minimum required free chlorine level for a public spa in most US jurisdictions?
Answer: 3.0–5.0 ppm
Most US health codes require public spa free chlorine to be maintained between 3.0 and 5.0 ppm due to elevated temperatures reducing sanitizer efficacy.