Plant Safety and Legislation Flashcards
6 cards from real CPCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Plant Safety and Legislation flashcards as text
Under the Provision and Use of Work Equipment Regulations 1998 (PUWER), who is primarily responsible for ensuring that construction plant is maintained in a safe condition?
Answer: The employer
Under PUWER 1998, the employer has the primary duty to ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair. This includes construction plant used on site.
What colour is the emergency stop button required to be on construction plant machinery?
Answer: Red
Emergency stop buttons must be red, typically on a yellow background, in accordance with BS EN ISO 13850. This is a universal safety standard to ensure quick identification in an emergency.
Before operating any construction plant on site, what must an operator hold as a minimum requirement under the CPCS scheme?
Answer: A valid CPCS card for the relevant plant category
The CPCS scheme requires operators to hold a valid CPCS card for the specific category of plant they intend to operate. This demonstrates they have been trained and assessed as competent for that particular machine.
What does a blue CPCS card indicate about the holder?
Answer: They are a trained operator working towards their NVQ
A blue CPCS card is the Trained Operator card, valid for two years, indicating the holder has passed the CPCS technical tests and is working towards achieving their NVQ/SVQ qualification to obtain the red Competent Operator card.
Under PUWER, what must an employer ensure before allowing a worker to use construction plant?
Answer: The worker has received adequate training and is competent
PUWER Regulation 9 requires employers to ensure that all persons who use work equipment have received adequate training for the purposes of health and safety, including training in the methods of use, risks, and precautions.
What is the primary purpose of a daily pre-use check on construction plant?
Answer: To identify defects or issues that could affect safe operation
Daily pre-use checks are essential to identify any defects, damage, or issues that could compromise safe operation. This is a legal requirement under PUWER and helps prevent accidents caused by equipment failure.