Plant Safety and Legislation Flashcards
6 cards from real CPCS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Plant Safety and Legislation flashcards as text
What does a red CPCS card signify?
Answer: The holder is a Competent Operator who has achieved their NVQ/SVQ
The red CPCS Competent Operator card is issued to operators who have passed the CPCS technical tests and achieved the relevant NVQ/SVQ qualification. It is renewable every five years and demonstrates full competence.
Under the Health and Safety at Work etc. Act 1974, what is the general duty of employees regarding plant safety?
Answer: To take reasonable care for their own health and safety and that of others
Section 7 of the Health and Safety at Work etc. Act 1974 places a duty on employees to take reasonable care for their own health and safety and that of other persons who may be affected by their acts or omissions at work.
What action should a plant operator take if they discover a fault during a pre-use inspection?
Answer: Report the fault and do not use the machine until it is rectified
If a fault is found during a pre-use check, the operator must report it to their supervisor immediately and not use the machine until the fault has been properly rectified by a competent person. Operating a defective machine puts lives at risk.
What is the minimum age at which a person can operate construction plant on a UK construction site?
Answer: 18 years old
Under UK health and safety legislation, a person must be at least 18 years old to operate construction plant on a construction site. This is because plant operation is classified as a high-risk activity unsuitable for young persons.
What does RIDDOR require in relation to construction plant incidents?
Answer: Certain serious injuries, dangerous occurrences, and fatalities must be reported
The Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR) requires employers to report specified workplace incidents to the HSE, including fatalities, specified injuries, over-7-day incapacitation injuries, and dangerous occurrences involving plant.
What must be clearly displayed on all construction plant operating on a UK site?
Answer: The machine's safe working load and identification markings
All construction plant must display clear identification markings and, where applicable, the safe working load (SWL). This is required under PUWER and LOLER to ensure operators know the machine's capabilities and limitations.