Paper Folding Analysis Flashcards
7 cards from real CogAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Paper Folding Analysis flashcards as text
A triangular flap is folded down over a square paper, then a hole is punched through both the flap and the sheet. When the flap is opened, how many holes show?
Answer: 2
The punch passes through the flap and the sheet beneath, leaving two holes when opened.
A paper is folded in half three times, then one hole is punched. How many holes appear when unfolded?
Answer: 8
Three folds make eight layers, so one punch creates eight holes.
A square is folded diagonally corner to corner, and a hole is punched in the middle of the long folded edge. After unfolding, the hole lies on which line?
Answer: The diagonal crease
Punching on the diagonal fold places the single hole directly on the diagonal crease line.
After folding a paper in half and punching a hole, the pattern shows two holes symmetric about a horizontal line. Which fold was used?
Answer: Top-to-bottom fold
Symmetry across a horizontal line indicates the crease was horizontal, meaning a top-to-bottom fold.
A paper folded into quarters has a small bite cut from the outer corner (away from the center). How many notches appear when unfolded?
Answer: 4
The outer corner of a quarter-folded sheet corresponds to all four corners, producing four notches.
If unfolding a once-folded paper shows holes that nearly touch at the center, the punch was made:
Answer: Very close to the fold line
Holes meeting near the center mean the original punch sat just beside the crease.
A paper is folded in half left-to-right, then top-to-bottom, and one hole is punched in the inner corner where folds meet. When unfolded, the four holes form:
Answer: A small cluster near the center
Punching at the inner meeting corner places all four holes close together around the center.