Management Systems, Regulations & Assurance Flashcards
7 cards from real CMSP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Management Systems, Regulations & Assurance flashcards as text
Under MSHA's Part 46 training regulations, which category of miner must complete at least 8 hours of training before beginning work at a surface mine?
Answer: New miners with no prior mining experience
Part 46 requires new miners (no prior mining experience) to receive at least 8 hours of training before starting work at a surface mine.
Which MSHA document formally identifies the standard violated, the condition or practice cited, and the time allowed for abatement?
Answer: Citation
An MSHA Citation (issued under Section 104(a)) formally documents the violated standard, the specific condition, and the abatement deadline.
In a mine safety management system, a 'lagging indicator' is best described as:
Answer: A metric measuring outcomes after an event has occurred
Lagging indicators measure outcomes of past events (e.g., injury rates), as opposed to leading indicators which are proactive measures.
The Mine Act Section 115 requires operators to have approved training plans. Who must approve these plans for underground coal mines under Part 48?
Answer: MSHA's Educational Policy and Development group
Under 30 CFR Part 48, training plans for underground coal mines must be approved by MSHA's Educational Policy and Development group.
A 'pattern of violations' (POV) designation under Section 104(e) of the Mine Act is triggered when:
Answer: A mine has a history of significant and substantial violations of mandatory health or safety standards
Section 104(e) POV is triggered by a history of S&S violations of mandatory standards, indicating a systemic failure to maintain safe conditions.
In the hierarchy of controls applied to mine hazards, which control is considered MOST effective?
Answer: Elimination or substitution
Elimination or substitution sits at the top of the hierarchy of controls because it removes the hazard entirely rather than managing exposure to it.
Which MSHA regulation requires mine operators to conduct workplace examinations to identify hazardous conditions before each shift?
Answer: 30 CFR Part 56/57 subpart B
30 CFR Parts 56/57 (Subpart B) require pre-shift workplace examinations to identify and correct hazardous conditions at surface and underground metal/nonmetal mines.