Facility & Resource Management Flashcards
7 cards from real CMI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Facility & Resource Management flashcards as text
Which type of floor finish application requires the most careful attention to dry time between coats?
Answer: Finish (floor wax)
Floor finish must be fully dry between coats to bond properly and achieve the desired gloss and durability.
A facility manager wants to reduce slip-and-fall incidents at building entrances during wet weather. The BEST facility solution is to:
Answer: Install adequate entrance matting systems to trap moisture
Entrance matting systems are the most effective passive control, capturing moisture before it spreads into the building.
When scheduling periodic deep cleaning tasks, which approach best balances facility appearance and operational disruption?
Answer: Schedule deep cleaning during low-occupancy or off-hours periods
Scheduling during low-occupancy periods minimizes disruption to building occupants and allows thorough work.
Which measurement tool is most useful for tracking the effectiveness of a custodial quality program over time?
Answer: Inspection scores tracked on a trend chart
Tracking inspection scores over time reveals whether cleaning quality is improving, declining, or stable.
A cleaning manager is asked to justify a new battery-powered auto-scrubber to administration. The strongest financial argument is:
Answer: Labor savings will offset the purchase cost within a defined payback period
A calculated payback period showing labor cost savings is the most compelling financial justification for capital equipment.
Which factor most directly affects the selection of a floor care pad color in a buffing operation?
Answer: The aggressiveness of cut needed for the task
Pad color indicates abrasiveness level; selecting the correct color ensures the task removes appropriate amounts of finish or soil.
When a custodial supervisor observes a new employee using a red microfiber cloth on a restroom toilet, then immediately on a sink without changing cloths, this indicates a need for training on:
Answer: Color-coded microfiber protocols to prevent cross-contamination
Color-coded microfiber systems assign specific colors to specific areas to prevent spreading pathogens between surfaces.