← All CLT Flashcard Decks

Clinical Laboratory Techniques & Procedures Flashcards

7 cards from real CLT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Clinical Laboratory Techniques & Procedures flashcards as text
  1. During electrophoresis of serum proteins on cellulose acetate, the band that migrates the farthest toward the anode at pH 8.6 is:

    Answer: Albumin

    Albumin carries the greatest net negative charge at pH 8.6 and therefore migrates farthest toward the positive electrode during serum protein electrophoresis.

  2. Which anticoagulant is found in a light-blue (sodium citrate) tube and works by:

    Answer: Chelating calcium ions required for coagulation

    Sodium citrate binds (chelates) ionized calcium, preventing activation of calcium-dependent clotting factors required for both intrinsic and extrinsic pathways.

  3. The principle of ion-selective electrode (ISE) technology used in modern electrolyte analyzers depends on:

    Answer: A semi-permeable membrane selective for a specific ion producing a measurable potential

    ISEs use an ion-selective membrane that generates a Nernstian potential proportional to the activity (concentration) of a specific ion in the sample.

  4. A technologist running a urine pregnancy test (hCG lateral flow immunoassay) reports a false-negative result in a patient known to be pregnant. The most likely cause is:

    Answer: High-dose hook effect from extremely elevated hCG

    The hook effect occurs when extremely high hCG concentrations saturate both capture and detection antibodies, preventing sandwich complex formation and causing a false-negative.

  5. Which of the following would be the best action when a reagent blank (reagent with no sample) reads higher absorbance than expected on a spectrophotometer?

    Answer: Investigate the reagents for contamination or degradation

    An unexpectedly high reagent blank suggests reagent contamination, wrong reagent preparation, or reagent degradation, all of which require investigation before reporting.

  6. When performing a gram stain, safranin is used as the:

    Answer: Counterstain to color gram-negative organisms pink

    Safranin is the counterstain applied after decolorization; it stains gram-negative bacteria (and decolorized gram-positives) pink/red for visualization.

  7. A laboratory measures linearity by testing five concentrations across the analytical measurement range. The method is considered linear when:

    Answer: The relationship between measured and expected values is described by a straight line with r² ≥ 0.99

    Linearity is confirmed when measured values across the concentration range follow a straight-line relationship, typically assessed by r² ≥ 0.99 and minimal deviation from expected values.