Manufacturing and Repair Flashcards
6 cards from real CIS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Manufacturing and Repair flashcards as text
An instrument specialist inspecting a box lock on a hemostat notices fine, spiderweb-like cracks emanating from the joint. This type of damage is most characteristic of which phenomenon?
Answer: Stress corrosion cracking
Stress corrosion cracking occurs when an instrument is exposed to a corrosive environment (like saline or chlorides from blood) while under physical stress. High-stress areas, such as the box lock, are particularly susceptible, and the damage manifests as fine, branching cracks.
In the manufacturing of surgical instruments, what is the primary advantage of a satin (matte) finish compared to a highly polished mirror finish?
Answer: It reduces glare from overhead operating room lights.
A satin or matte finish diffuses light rather than reflecting it directly. This reduction in glare is a significant ergonomic benefit for the surgical team, as it reduces eye strain under intense operating room lighting.
What property of 400-series martensitic stainless steel makes it the preferred material for the manufacturing of scissors, osteotomes, and chisels?
Answer: Its ability to be heat-hardened
400-series stainless steel contains more carbon, which allows it to be heat-treated to achieve a high degree of hardness. This hardness is essential for creating and maintaining a sharp, durable cutting edge required for instruments like scissors and osteotomes. 300-series steel is more corrosion-resistant but cannot be hardened to the same extent.
A new batch of stainless steel retractors shows signs of rust after only a few processing cycles. The hospital's water quality and sterilization processes are verified to be within specifications. Which manufacturing step was most likely inadequately performed?
Answer: Passivation
Passivation is a chemical process using an acid solution to remove free iron from the surface of stainless steel, creating a passive chromium oxide layer that significantly enhances corrosion resistance. If this step is missed or performed incorrectly, the instrument is left vulnerable to rust, even with proper hospital processing.
A repair technician has just finished sharpening a 1/2 inch osteotome. To verify the repair is successful and the edge is free of burrs or chips, what is the recommended functional test?
Answer: Shaving a small piece of a plastic dowel rod.
The industry standard for testing the sharpness of an osteotome or chisel is to use it to shave a thin piece from a plastic dowel rod. A properly sharpened edge will grab the material and create a smooth curl without snagging, which indicates a sharp, uniform edge.
When the tungsten carbide inserts on a needle holder become worn, which of the following is the appropriate repair action?
Answer: The inserts should be completely replaced.
Tungsten carbide inserts are designed to be replaceable components. Attempting to file or re-etch them will destroy the precise gripping pattern. The proper repair involves removing the worn inserts and brazing or welding new ones into place.