CFPS - Certified Fire Protection Specialist Passive Fire Protection Questions and Answers

Question 1

An architect is designing a large single-story warehouse and needs to subdivide the building into separate, distinct fire areas such that each area can be considered a separate building from a code perspective.
Which type of fire-rated assembly is required to achieve this separation?

Accepted Answer

A fire wall

Answer

A 2-hour fire barrier

Answer

A 1-hour fire partition

Answer

A smoke barrier

Question 2

An IT contractor has just installed a new bundle of communication cables through a 2-hour fire-rated gypsum wall assembly. Which of the following is the MOST critical next step to maintain the compartmentation objective of the passive fire protection system?

Accepted Answer

Installing a listed through-penetration firestop system in the opening around the cables.

Answer

Painting the cables to match the wall color for aesthetics.

Answer

Placing a label on the wall indicating the location of the new penetration.

Answer

Securing the cables to the wall surface with plastic clamps.

Question 3

During a routine inspection of a hospital, a facility manager finds a 90-minute fire-rated door leading to an exit stairwell propped open with a wooden wedge. Which of the following statements BEST describes the significance of this condition?

Accepted Answer

The door's function as a barrier to fire and smoke is defeated, creating a significant life safety hazard.

Answer

The condition is acceptable as long as a fire extinguisher is located within 15 feet of the door.

Answer

This is a minor code violation, as the door can be closed manually by staff in an emergency.

Answer

Propping the door is permissible during high-traffic periods for convenience, provided it is closed at night.

Question 4

A fire protection engineer is specifying a method to protect the structural steel columns in a new high-rise building to achieve a 2-hour fire-resistance rating. Which of the following is a common passive fire protection method for this application?

Accepted Answer

Encasing the steel columns in a specified thickness of fire-rated gypsum wallboard.

Answer

Installing an automatic sprinkler system with heads located directly above each column.

Answer

Applying a thin layer of standard alkyd paint to the steel for corrosion protection.

Answer

Using high-strength steel alloys that are inherently fireproof without additional protection.

Question 5

A through-penetration firestop system is tested and listed according to ASTM E814 / UL 1479. What does the 'T' Rating of such a system indicate?

Accepted Answer

The time period before the temperature on the unexposed surface rises more than 325°F (181°C) above ambient.

Answer

The total number of penetrating items that can pass through the system.

Answer

The time period that the system resists the passage of flame through the opening.

Answer

The system's tested resistance to the transmission of sound (Transmission Class).

Question 6

An architect is designing a 1-hour fire-resistance-rated wall for an exit access corridor. They want to include a large 4 ft x 6 ft window to provide visibility into an adjacent office. To maintain the integrity of the 1-hour wall and prevent radiant heat from blocking the egress path, which type of glazing MUST be specified?

Accepted Answer

Fire-resistive glazing

Answer

Standard annealed glass

Answer

Wired glass

Answer

Fire-protective glazing

An architect is designing a large single-story warehouse and needs to subdivide the building into separate, distinct fire areas such that each area can be considered a separate building from a code perspective.Which type of fire-rated assembly is required to achieve this separation?

An architect is designing a large single-story warehouse and needs to subdivide the building into separate, distinct fire areas such that each area can be considered a separate building from a code perspective.
Which type of fire-rated assembly is required to achieve this separation?