Practice Test Geeks(CFI) Certified Flooring Installer Practice Test
← All CFI Flashcard Decks

Measurement & Layout Planning Flashcards

7 cards from real CFI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Measurement & Layout Planning flashcards as text

  1. A bathroom measures 7 ft 6 in × 9 ft 3 in. What is the area in square feet?

    Answer: 69.375 sq ft

    Convert to decimals: 7.5 ft × 9.25 ft = 69.375 sq ft.

  2. When planning a herringbone pattern layout, what additional layout step is required compared to a standard straight layout?

    Answer: A second chalk line perpendicular to the first must be established at the center

    Herringbone layouts require two perpendicular reference lines intersecting at the center to keep the 90-degree alternating pattern aligned across the room.

  3. What is 'dry-laying' or 'dry-fitting' flooring before installation?

    Answer: Installing flooring without adhesive to test the pattern and fit before committing to a permanent install

    Dry-laying means temporarily placing flooring pieces without adhesive to verify the pattern, cuts, and layout before permanent installation.

  4. How many square feet are in a room that measures 13 ft × 15 ft, and how much material should you order if you add 10% for waste?

    Answer: 195 sq ft; order 214.5 sq ft

    13 × 15 = 195 sq ft; 195 × 1.10 = 214.5 sq ft is the amount to order.

  5. When using the 3-4-5 triangle method to check if a layout line is square, what does it confirm?

    Answer: That two reference lines are perpendicular (90 degrees) to each other

    The 3-4-5 method (measuring 3 ft on one line, 4 ft on the other, and checking that the diagonal is 5 ft) confirms the two lines are at a true 90-degree angle.

  6. Which factor most directly determines whether flooring planks should run parallel or perpendicular to the longest wall?

    Answer: The longest wall direction, which makes the room appear larger

    Running planks parallel to the longest wall (or toward the main light source) visually elongates the room and is the standard aesthetic guideline.

  7. An installer needs to tile a 200 sq ft room using 12×12-inch tiles. Approximately how many tiles are needed with a 10% waste allowance?

    Answer: 220 tiles

    Each 12×12 tile covers 1 sq ft; 200 tiles cover the area, and 200 × 1.10 = 220 tiles with 10% waste.