Building Construction & Fire Behavior Flashcards
7 cards from real CFI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Building Construction & Fire Behavior flashcards as text
What does the term 'fire load' refer to in building construction and fire inspection?
Answer: The total amount of combustible material in a space expressed in heat energy per unit area
Fire load (fuel load) is the total heat energy that would be released if all combustible contents and materials in a compartment burned, typically expressed in BTU/ft² or MJ/m².
Which construction feature most effectively limits horizontal fire spread between tenant spaces in a multi-story building?
Answer: Fire walls extending from foundation to roof
Fire walls are structural barriers that extend continuously from foundation through the roof and are designed to prevent fire spread even if one side of the wall collapses.
A ventilation-controlled fire differs from a fuel-controlled fire in that it:
Answer: Has its combustion rate limited by available oxygen rather than fuel
In a ventilation-controlled fire, the oxygen supply is insufficient to combust all available fuel, so the burning rate is limited by ventilation openings rather than fuel quantity.
Which fire behavior phenomenon poses the greatest risk to firefighters who open a door to a smoke-filled, oxygen-deprived room that has been burning for some time?
Answer: Backdraft
Backdraft occurs when a smoldering, oxygen-deprived fire receives a sudden inrush of air, causing explosive ignition of accumulated unburned gases.
An inspector is reviewing plans for a building with a required 2-hour fire-resistive rating on structural members. Which test standard is most commonly referenced for these assemblies in the US?
Answer: ASTM E119 Standard Test Methods for Fire Tests of Building Construction
ASTM E119 is the standard US test method used to determine the fire resistance rating of building assemblies such as walls, floors, columns, and beams.
What structural concern is specific to lightweight wood truss construction under fire conditions?
Answer: A single member failure can cause collapse of the entire truss system
Lightweight wood trusses are interconnected systems where failure of one member (especially metal gusset plate connectors heated by fire) can trigger progressive collapse of the entire roof or floor.
Which factor most influences the speed at which fire travels across a ceiling in a compartment?
Answer: Ceiling surface combustibility and the temperature of the hot gas layer
Ceiling surface combustibility combined with the heat content and temperature of the accumulated hot gas layer at ceiling level primarily governs how quickly fire spreads across the ceiling.