Reporting Requirements & Standards Flashcards
7 cards from real CET practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Reporting Requirements & Standards flashcards as text
Which FCC regulation part primarily governs unintentional radiators such as digital devices and computers?
Answer: FCC Part 15
FCC Part 15 sets emission limits for unintentional radiators including computers, switching power supplies, and digital electronics.
In a calibration report, what does 'traceability' mean?
Answer: Linking measurements back to national or international standards through an unbroken chain
Measurement traceability means calibration results can be linked to NIST or other recognized standards through a documented chain of calibrations.
What is the correct sequence for completing a failure report?
Answer: Symptom description → root cause analysis → corrective action
Proper failure reports follow a logical sequence: document symptoms first, analyze root cause, then define corrective action.
Under OSHA 29 CFR 1910.303, what must be documented when working on electrical panels above 50V?
Answer: Lockout/Tagout procedures and energy control records
OSHA's electrical safety standards require documented LOTO (Lockout/Tagout) procedures and energy control records for hazardous energy sources.
Which of the following BEST describes a 'revision' in technical documentation?
Answer: An authorized change to a document that is tracked with a new version identifier
A document revision is a controlled, authorized change tracked with a new version number or letter to maintain document history.
A technician tests a power supply and finds output voltage is within tolerance. How should this result be recorded?
Answer: Measured value, specification limits, pass/fail result, and date/technician signature
Test records must include measured values, specification limits, pass/fail determination, date, and technician identification for traceability.
What does the term 'Mean Time Between Failures' (MTBF) represent in electronics reliability reporting?
Answer: The average operating time between repairable failures of a system
MTBF is a reliability metric representing the average time a system operates between failures, used to predict reliability and schedule maintenance.