Safety and Communication Flashcards
7 cards from real CESSWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety and Communication flashcards as text
What information is typically required when logging a rainfall event in storm water inspection records?
Answer: Date, estimated or measured precipitation amount, and whether an inspection was triggered
Rainfall logs must capture date, precipitation amount, and whether the event triggered an inspection under permit requirements to demonstrate compliance.
Which scenario most likely triggers a post-storm inspection requirement under typical NPDES construction permits?
Answer: A rainfall event meeting or exceeding the permit-specified threshold (commonly 0.25–0.5 inches)
Most construction general permits specify a rainfall depth threshold (often 0.25 or 0.5 inches) that triggers a required inspection within a defined timeframe afterward.
What is the primary purpose of maintaining a chain of custody for water quality samples collected during a storm water inspection?
Answer: To ensure sample integrity and legal defensibility by documenting all handlers from collection to laboratory analysis
Chain of custody documentation preserves sample integrity and ensures results are legally defensible by tracking every person who handled the sample.
A CESSWI inspector working solo in a remote area of a large construction site should implement which safety practice?
Answer: Establish a check-in schedule with a supervisor and carry a communication device
Solo workers in remote areas must establish scheduled check-ins and carry reliable communication devices to ensure timely response if an accident occurs.
In the context of SWPPP communication, what does the acronym 'NOI' stand for?
Answer: Notice of Intent
NOI stands for Notice of Intent, the document submitted to the permitting authority to obtain coverage under a general NPDES permit before construction begins.
When an inspector uses photographic documentation, what information should accompany each photo in the inspection record?
Answer: Date, time, location (station or GPS), subject description, and direction of view
Each photo should be accompanied by date, time, specific location, description of what is depicted, and viewing direction to be useful in enforcement or legal proceedings.
What action should a CESSWI inspector take if they encounter an aggressive or threatening response from a contractor during an inspection?
Answer: Calmly disengage, ensure personal safety, and report the incident to the supervisor and regulatory agency as required
Inspector safety takes priority; disengaging calmly and reporting the incident through proper channels protects both the inspector and the integrity of the regulatory process.