Hazardous Materials Handling Flashcards
7 cards from real CEA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Hazardous Materials Handling flashcards as text
Under RCRA, which of the following best describes a 'characteristic hazardous waste'?
Answer: Waste exhibiting ignitability, corrosivity, reactivity, or toxicity
Characteristic hazardous wastes are defined by four properties: ignitability, corrosivity, reactivity, or toxicity (TCLP test).
A facility stores 400 kg of non-acute hazardous waste on-site. Under RCRA, this facility is classified as a:
Answer: Small Quantity Generator (SQG)
SQGs generate or accumulate between 100 kg and 1,000 kg of non-acute hazardous waste per month.
Which DOT label color and symbol indicates an oxidizer hazard on a hazardous materials package?
Answer: Yellow label with flame-over-circle symbol
DOT Class 5.1 oxidizers use a yellow label with a flame-over-circle symbol.
During a hazardous materials audit, an inspector finds drums stored on their sides without secondary containment. The primary regulatory concern is:
Answer: Potential for spills and inadequate containment under 40 CFR Part 264/265
RCRA storage regulations require secondary containment capable of holding 10% of drum volume or the largest container volume to prevent releases.
The NFPA 704 diamond system uses which color quadrant to indicate health hazard?
Answer: Blue (left)
The NFPA 704 diamond uses the blue left quadrant to indicate health hazard on a 0–4 scale.
Which federal regulation governs the emergency planning and community right-to-know requirements for facilities handling extremely hazardous substances?
Answer: EPCRA (SARA Title III)
EPCRA (Emergency Planning and Community Right-to-Know Act), enacted as SARA Title III, governs emergency planning and Tier I/II reporting for extremely hazardous substances.
When auditing a hazardous materials storage area, which document must be immediately accessible to emergency responders at a facility covered by OSHA's Process Safety Management (PSM) standard?
Answer: Process Hazard Analysis (PHA) summary
PSM-covered facilities must maintain accessible PHAs and process safety information so emergency responders understand chemical hazards and process conditions.