Audio Networking and Dante Protocol Flashcards
6 cards from real CEA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Audio Networking and Dante Protocol flashcards as text
What is the Dante audio networking protocol primarily used for in professional audio environments?
Answer: A Layer 3 IP-based protocol for transporting uncompressed, low-latency multi-channel digital audio over standard Ethernet networks
Dante (Digital Audio Network Through Ethernet), developed by Audinate, is an IP-based audio networking protocol that transports uncompressed PCM audio with low latency over standard gigabit Ethernet infrastructure. It can carry hundreds of channels over a single CAT6 cable while maintaining sample-accurate synchronization.
In a Dante network, what is the function of the 'Dante Controller' software?
Answer: A software application used to route audio channels between Dante-enabled devices on the network and configure device settings
Dante Controller is a free software application (Windows/Mac) provided by Audinate that discovers Dante devices on the network, displays available transmitters and receivers, and allows engineers to create audio routes (subscriptions) between devices via a routing matrix interface.
What Ethernet cable standard is recommended for professional Dante audio networks to ensure reliable operation?
Answer: CAT5e or higher, with CAT6 or CAT6A preferred for gigabit speeds and reduced crosstalk
Dante recommends CAT5e or better cabling, with CAT6 or CAT6A preferred for gigabit Ethernet speeds and superior crosstalk rejection. CAT6A supports 10 Gbps at distances up to 100 m and is the current best practice for new installations.
What is 'PTP' (Precision Time Protocol, IEEE 1588) and why is it critical to Dante?
Answer: A protocol that synchronizes clocks across all devices on the network to sub-microsecond precision, enabling sample-accurate audio alignment
PTP (IEEE 1588 Precision Time Protocol) synchronizes all clocks on a Dante network to sub-microsecond precision. Dante uses PTP to ensure all devices share a common clock reference, which is essential for maintaining sample-accurate alignment of audio streams across multiple networked devices.
What is the difference between a 'unicast' and 'multicast' flow in Dante networking?
Answer: Unicast sends audio to a single receiver; multicast distributes one audio stream to multiple receivers simultaneously, reducing network bandwidth compared to multiple unicast flows
In a Dante network, unicast flows send a dedicated audio stream from one transmitter to one receiver, using bandwidth proportional to the number of routes. Multicast flows transmit one stream that multiple receivers can subscribe to, significantly reducing network load when the same audio source must be distributed to many endpoints.
What does 'Dante Domain Manager' (DDM) add to a standard Dante network?
Answer: Centralized access control, user authentication, audit logging, and the ability to manage Dante devices across multiple network subnets
Dante Domain Manager provides enterprise-level network management for Dante: user role-based access control (who can route audio), activity logging, multi-subnet operation, and centralized device management. It is used in installations where security, accountability, and large-scale network management are required.