CAR Workplace Safety and OSHA 4

Question 1

What is the correct action when an air-bag (SRS) module is still deployed but the inflator has not fired during vehicle dismantling?

Accepted Answer

Treat it as a live explosive device and follow manufacturer disarming procedures

Answer

Remove it immediately and place in a metal bin

Answer

Cut the wiring harness and discard the module in regular scrap

Answer

Activate it intentionally in the yard before dismantling

Question 2

Under OSHA's Noise standard (29 CFR 1910.95), at what 8-hour TWA sound level must employers implement a hearing conservation program?

Accepted Answer

85 dBA

Answer

90 dBA

Answer

80 dBA

Answer

100 dBA

Question 3

A worker is about to use an angle grinder to cut catalytic converters. Which PPE combination is most appropriate?

Accepted Answer

Face shield over safety glasses, hearing protection, and cut-resistant gloves

Answer

Safety glasses only and standard work gloves

Answer

Hard hat and steel-toed boots only

Answer

A dust mask and chemical splash goggles

Question 4

Under OSHA's Walking-Working Surfaces standard, what is required for fixed ladders extending more than 24 feet?

Accepted Answer

A ladder safety system or cage with rest platforms every 150 feet

Answer

Non-slip rungs and side rails painted bright yellow

Answer

A buddy system requiring two workers present

Answer

A handrail on at least one side

Question 5

What is the first step in safely managing a small solvent fire in an auto parts cleaning area?

Accepted Answer

Activate the fire alarm and evacuate the immediate area

Answer

Grab the nearest fire extinguisher and attempt suppression immediately

Answer

Open all doors and windows to ventilate the area

Answer

Call 911 and wait outside the building

Question 6

Which OSHA standard requires automotive recyclers to assess each job for PPE needs and document that assessment in writing?

Accepted Answer

29 CFR 1910.132 – General PPE Requirements

Answer

29 CFR 1910.133 – Eye and Face Protection

Answer

29 CFR 1910.138 – Hand Protection

Answer

29 CFR 1910.136 – Foot Protection

Question 7

In an automotive recycling yard, which condition most commonly causes hydrogen sulfide (H₂S) exposure?

Accepted Answer

Disturbing standing water or sludge in old fuel tanks and sumps

Answer

Draining engine coolant from radiators

Answer

Removing rubber door seals and gaskets

Answer

Charging lead-acid batteries in open air