Practice Test Geeks(CAR) Certified Automotive Recycler Practice Test
← All CAR Flashcard Decks

Vehicle Dismantling Procedures Flashcards

7 cards from real CAR practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Vehicle Dismantling Procedures flashcards as text

  1. Which of the following best describes the correct order for dismantling a vehicle with both gasoline and high-voltage systems (plug-in hybrid)?

    Answer: Disconnect 12V battery, then isolate high-voltage system, then drain fluids

    Disconnecting the 12V battery first disables most control circuits, followed by isolating the high-voltage system per OEM procedures, before proceeding to fluid drainage.

  2. When removing a used transfer case from a 4WD vehicle, what should be done to the driveshafts BEFORE unbolting the transfer case?

    Answer: Mark their orientation for reinstallation reference and support them to prevent them from falling

    Marking driveshaft orientation ensures proper balance when reinstalled, and supporting them prevents injury and damage when the transfer case is lowered.

  3. A used power steering rack is being removed. Which step reduces fluid spillage and contamination of other parts?

    Answer: Plug the hydraulic line ports immediately after disconnecting each hose

    Plugging ports immediately after disconnecting hoses contains residual fluid and prevents contamination of surrounding components and the work area.

  4. What is the purpose of a 'run and test' documentation tag attached to a dismantled engine?

    Answer: It records that the engine was verified to start and run before removal, along with mileage and observed condition

    A run-and-test tag provides buyers with documented evidence of the engine's operational status, mileage, and any noted conditions at time of removal.

  5. When cutting a vehicle body panel with an air chisel, what PPE is MOST critical in addition to safety glasses?

    Answer: Hearing protection, because air chisels generate high decibel noise levels

    Air chisels typically produce noise levels above 100 dB, making hearing protection essential to prevent noise-induced hearing loss.

  6. Which government program facilitates the collection and recycling of mercury-containing automotive switches in the United States?

    Answer: The End-of-Life Vehicle Solutions (ELVS) / Vehicle Mercury Switch Recovery Program (VMSR)

    ELVS/VMSR is an industry-run, EPA-supported program that provides free collection containers and manages recycling of mercury convenience lighting switches from recycled vehicles.

  7. A vehicle's airbag has NOT deployed after a collision. Before dismantling, the BEST course of action is:

    Answer: Treat the undeployed airbag as a live explosive device, follow OEM disabling procedures, and wear appropriate PPE

    Undeployed airbags are potentially live pyrotechnic devices; OEM disabling procedures and PPE must be followed to prevent accidental deployment and serious injury.