Practice Test Geeks(CAM) Certified Aviation Manager Practice Test
← All CAM Flashcard Decks

Aircraft Maintenance and Facilities Flashcards

6 cards from real CAM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Aircraft Maintenance and Facilities flashcards as text

  1. A flight department is establishing a new maintenance hangar and needs to select the appropriate fire suppression system. According to NFPA 409, which hangar classification would have the most stringent fire protection requirements, typically due to its large size and the types of aircraft it can house?

    Answer: Group I

    NFPA 409 classifies aircraft hangars into four groups. Group I hangars are generally the largest, with features like an aircraft access door height of more than 28 feet or a single fire area greater than 40,000 square feet. Due to the significant value of the assets and the potential fire load, they require the most comprehensive and robust fire protection systems.

  2. A Certified Aviation Manager is overseeing the setup of a new maintenance facility. To ensure compliance with environmental regulations regarding hazardous waste, which U.S. federal agency's regulations, particularly the Resource Conservation and Recovery Act (RCRA), must be followed for the proper handling, storage, and disposal of materials like solvents, paints, and used oils?

    Answer: Environmental Protection Agency (EPA)

    The Environmental Protection Agency (EPA) regulates the management of hazardous waste under the Resource Conservation and Recovery Act (RCRA). Aviation maintenance facilities must comply with RCRA's framework for handling, storing, transporting, and disposing of hazardous materials to minimize risks to both human health and the environment.

  3. During a routine facility audit, an aviation manager observes maintenance technicians working on an aircraft's wing at a height of 8 feet without any fall protection. According to OSHA's general industry standards, what is the minimum height at which fall protection is required?

    Answer: 4 feet

    OSHA's general industry standards (29 CFR 1910) mandate that fall protection be provided for employees working on surfaces with an unprotected side or edge that is 4 feet or more above a lower level. The FAA's Flight Standards Service Fall Protection Program aligns with this, also requiring fall protection for exposures to falls from elevations greater than four feet.

  4. A corporate flight department operates two multi-engine aircraft under 14 CFR Part 135. The Director of Maintenance proposes implementing an Approved Aircraft Inspection Program (AAIP). Which of the following is a mandatory requirement for gaining FAA approval for the AAIP?

    Answer: The program must be submitted to the Administrator for approval and included in the company's manual.

    According to 14 CFR § 135.419, a certificate holder who wishes to use an Approved Aircraft Inspection Program must submit the program to the FAA Administrator for approval. Once approved, the program must be incorporated into the manual required by § 135.21.

  5. An aviation manager is developing a comprehensive maintenance program. A key component of modern maintenance management is shifting from a reactive to a proactive approach. Which of the following strategies BEST embodies this proactive philosophy?

    Answer: Implementing a predictive maintenance program using data analytics and trend monitoring.

    Modern aircraft maintenance management emphasizes a proactive approach to prevent failures before they occur. Predictive maintenance, which leverages data analytics, trend monitoring, and advanced monitoring systems, is a core strategy for this. It helps anticipate potential issues, enhancing reliability and reducing unscheduled downtime.

  6. A maintenance facility manager is responsible for ensuring all required documentation is properly recorded after a maintenance event. Which of the following is NOT a required element for a maintenance record entry under 14 CFR Part 43?

    Answer: The cost of the parts used in the repair.

    While tracking costs is a critical business function, 14 CFR Part 43, which governs maintenance records, does not require the cost of parts to be included in the official maintenance entry. The regulation requires a description of the work, the date of completion, and the signature, certificate number, and kind of certificate held by the person performing the work.