CAM - Certified Aviation Manager Airport Operations and Ground Handling Questions and Answers Flashcards
6 cards from real CAM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CAM - Certified Aviation Manager Airport Operations and Ground Handling Questions and Answers flashcards as text
During a severe weather alert, an aviation manager should consult which document to determine ramp closure thresholds for lightning?
Answer: Airport Weather Operations Manual / Lightning Safety Policy
Each airport's Weather Operations Manual or Lightning Safety Policy specifies lightning distance thresholds (typically 5–8 miles) that trigger ramp closures for worker safety.
What is the purpose of a 'weight and balance' load sheet prepared before each departure?
Answer: To confirm the aircraft's center of gravity is within approved limits for safe flight
The load sheet ensures the aircraft's loaded center of gravity falls within the manufacturer's approved envelope, which is critical for safe takeoff and flight handling.
Which international standard defines dangerous goods training requirements for ground handling personnel?
Answer: IATA Dangerous Goods Regulations (DGR)
IATA's Dangerous Goods Regulations (DGR) specify categories, packaging, labeling, and the recurrent training requirements for ground staff handling hazardous materials.
A 'hot spot' on an airport movement area map indicates:
Answer: An area of the airport with a history of runway incursions or surface incidents
FAA hot spots are locations on an airport's movement area identified as having a history of or potential for runway incursions or surface incidents, requiring heightened pilot and driver attention.
An aviation manager notices that ground handling turn times consistently exceed the contractual SLA. The FIRST corrective step should be:
Answer: Conduct a time-motion study to identify specific bottleneck tasks in the turn process
A time-motion study isolates where time is actually being lost in the turn sequence before committing resources, ensuring corrective actions address real bottlenecks.
Under OSHA 1910.303 and related standards, what is required before ground personnel perform maintenance on GSE electrical systems?
Answer: Lockout/Tagout (LOTO) procedures to isolate hazardous energy
OSHA's Lockout/Tagout standard requires energy isolation procedures before any maintenance on equipment with potentially hazardous stored energy, protecting workers from unexpected energization.