CAM - Certified Aviation Manager Aircraft Maintenance and Facilities Questions and Answers

Question 1

A flight department is establishing a new maintenance hangar and needs to select the appropriate fire suppression system.
According to NFPA 409, which hangar classification would have the most stringent fire protection requirements, typically due to its large size and the types of aircraft it can house?

Accepted Answer

Group I

Answer

Group II

Answer

Group IV

Answer

Group III

Question 2

A Certified Aviation Manager is overseeing the setup of a new maintenance facility. To ensure compliance with environmental regulations regarding hazardous waste, which U.S. federal agency's regulations, particularly the Resource Conservation and Recovery Act (RCRA), must be followed for the proper handling, storage, and disposal of materials like solvents, paints, and used oils?

Accepted Answer

Environmental Protection Agency (EPA)

Answer

Federal Aviation Administration (FAA)

Answer

Occupational Safety and Health Administration (OSHA)

Answer

National Transportation Safety Board (NTSB)

Question 3

During a routine facility audit, an aviation manager observes maintenance technicians working on an aircraft's wing at a height of 8 feet without any fall protection. According to OSHA's general industry standards, what is the minimum height at which fall protection is required?

Accepted Answer

4 feet

Answer

6 feet

Answer

10 feet

Answer

5 feet

Question 4

A corporate flight department operates two multi-engine aircraft under 14 CFR Part 135. The Director of Maintenance proposes implementing an Approved Aircraft Inspection Program (AAIP). Which of the following is a mandatory requirement for gaining FAA approval for the AAIP?

Accepted Answer

The program must be submitted to the Administrator for approval and included in the company's manual.

Answer

The program must be renewed annually with the local FSDO.

Answer

The program can only be developed by the aircraft's original equipment manufacturer (OEM).

Answer

All maintenance must be performed by an FAA-certified Repair Station.

Question 5

An aviation manager is developing a comprehensive maintenance program. A key component of modern maintenance management is shifting from a reactive to a proactive approach. Which of the following strategies BEST embodies this proactive philosophy?

Accepted Answer

Implementing a predictive maintenance program using data analytics and trend monitoring.

Answer

Relying solely on the manufacturer's recommended Time Between Overhaul (TBO) intervals.

Answer

Performing maintenance only after a component fails to minimize initial costs.

Answer

Adhering strictly to a calendar-based inspection schedule without deviation.

Question 6

A maintenance facility manager is responsible for ensuring all required documentation is properly recorded after a maintenance event. Which of the following is NOT a required element for a maintenance record entry under 14 CFR Part 43?

Accepted Answer

The cost of the parts used in the repair.

Answer

A description of the work performed.

Answer

The date the work was completed.

Answer

The signature and certificate number of the person approving the aircraft for return to service.