CAL Vehicle Entry Techniques 5

Question 1

What is the purpose of a 'probe set' in professional vehicle entry?

Accepted Answer

A collection of various tipped tools used to locate and manipulate different lock linkages inside the door

Answer

A diagnostic set for reading TPMS sensors

Answer

A kit for probing ignition cylinders

Answer

A set of picks for wafer locks only

Question 2

How does wedge placement on the hinge side of a door differ from placement on the latch side?

Accepted Answer

Hinge-side is always preferred for all vehicles

Answer

Hinge-side placement opens a gap at the latch side; latch-side placement opens the gap where tools need to work

Answer

Latch-side placement risks bending the hinge

Answer

There is no functional difference in placement

Question 3

On a vehicle with a vertical push-button door lock, what tool tip orientation is most effective?

Accepted Answer

A loop or U-shaped tip that can press down directly on top of the button

Answer

A J-hook for pulling the button

Answer

A straight rod to slide under the button

Answer

A wedge tip to pry the button sideways

Question 4

What documentation should a locksmith obtain before performing vehicle entry for a roadside service call?

Accepted Answer

Government-issued ID matching the vehicle registration and a signed service authorization form

Answer

Only the customer's phone number

Answer

The VIN number alone is sufficient

Answer

A verbal confirmation from the customer

Question 5

Which vehicle body style typically offers the easiest non-destructive entry due to less rigid door seals?

Accepted Answer

Older model trucks and full-size vans

Answer

Late-model luxury sedans

Answer

Armored SUVs

Answer

Convertibles with hardtops

Question 6

When a long-reach tool becomes stuck inside the door during entry, what is the correct first response?

Accepted Answer

Slowly retract the tool along the same path it entered to avoid snagging wiring or linkage

Answer

Yank the tool out quickly to save time

Answer

Cut the tool free with wire cutters

Answer

Drill a hole in the door to free the tool

Question 7

A locksmith is called to open a fleet vehicle at night without proper lighting. What is the safest practice?

Accepted Answer

Use a work light or headlamp to clearly see the door gap and tool position before inserting any tools

Answer

Proceed by feel to save time

Answer

Skip wedge protectors since damage won't be visible

Answer

Insert the Slim Jim quickly and move it around until the door opens