CAL Vehicle Entry Techniques 4

Question 1

On a vehicle with a 'fold-down' door lock post (like many Chrysler products), how does a long-reach tool typically unlock it?

Accepted Answer

Push the post down to the unlock position using a loop or straight-tip tool

Answer

Pull the post upward using a J-hook

Answer

Rotate the post 90 degrees with a wedge tool

Answer

Slide a Slim Jim under the post to lift

Question 2

What is a 'knuckle buster' in the context of vehicle entry long-reach tools?

Accepted Answer

A tool with a rounded tip used to push or pull lock levers in tight spaces

Answer

A tool for breaking car windows

Answer

A drill attachment for lock cylinders

Answer

A wedge with sharp edges

Question 3

Which entry technique is preferred when a vehicle's window is already cracked open slightly?

Accepted Answer

Insert a long-reach tool through the window gap to operate the interior lock or handle

Answer

Force the window open further with a pry bar

Answer

Drill the door lock

Answer

Use a Slim Jim in the door gap

Question 4

When attempting entry on a vehicle with a Honda-style horizontal door lock slider, which tool motion is needed?

Accepted Answer

Push the slider toward the rear of the vehicle to unlock

Answer

Lift the slider vertically upward

Answer

Rotate the slider clockwise

Answer

Pull the slider toward the front of the vehicle

Question 5

A child is locked in a hot car and the locksmith must enter immediately. Which method is justified despite potential vehicle damage?

Accepted Answer

Breaking the window furthest from the child to create entry quickly

Answer

Waiting for the manufacturer-approved entry tool

Answer

Calling the dealer before proceeding

Answer

Using an air wedge to slowly create a gap

Question 6

What is the function of a 'big easy' tool in vehicle entry?

Accepted Answer

A long flexible rod with a looped tip used to pull interior door handles

Answer

A hydraulic door spreader

Answer

A bump key for auto locks

Answer

A thin wedge for tight door gaps

Question 7

Why should locksmiths avoid using a Slim Jim on vehicles manufactured after approximately 2000?

Accepted Answer

Newer vehicles have complex door wiring and airbag inflators in the door cavity that can be damaged

Answer

The doors are made of aluminum that bends easily

Answer

Slim Jims are illegal in all states after 2000

Answer

Modern lock rods are too thick for Slim Jims to move