Vehicle Damage Assessment & Estimation Flashcards
7 cards from real CAIA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Vehicle Damage Assessment & Estimation flashcards as text
An adjuster is estimating a damaged hood that requires replacement. The database shows an OEM part is available, but an aftermarket equivalent costs 40% less. What consideration applies?
Answer: Policy terms, state regulations, and part quality must all be considered before selecting aftermarket parts
The selection of aftermarket parts must comply with state regulations, policy language, and quality standards to ensure the vehicle is restored to its pre-loss condition.
Which estimating software platform uses 'P-pages' to define included and not-included repair operations?
Answer: All major estimating platforms publish similar procedural guides
All major estimating platforms (Mitchell, CCC, Audatex) publish procedural guides that define what operations are included or excluded in their standard labor times.
What does a 'blend' operation in a paint estimate accomplish?
Answer: Feathering new paint into adjacent panels to achieve a seamless color match
Blending involves gradually feathering new paint color into adjacent panels so the repaired area is indistinguishable from surrounding original paint.
A vehicle is determined to be a total loss. The insured has $1,500 in aftermarket upgrades installed before the accident. How are these typically handled?
Answer: Evaluated separately and potentially compensated based on the upgrade's contributory value to market value
Aftermarket upgrades may be compensated, but their value contribution is based on how much they increase the vehicle's actual market value, not their purchase price.
Which component is part of the supplemental restraint system (SRS) that must be inspected after any moderate to severe collision?
Answer: Airbag modules and sensors
Airbag modules and sensors may be damaged or triggered during a collision and must be inspected and potentially replaced to restore the SRS to full functionality.
When an adjuster uses the 'three-point measurement' method during frame inspection, what is being measured?
Answer: Diagonal, longitudinal, and datumplane dimensions to identify frame misalignment
Three-point measurement compares diagonal, longitudinal, and datum measurements to factory specs to identify where frame distortion has occurred.
A rear collision causes damage to the vehicle's bumper cover, bumper reinforcement bar, and foam energy absorber. Which of these is considered a safety component?
Answer: Bumper reinforcement bar and foam energy absorber
The reinforcement bar and foam absorber are structural safety components designed to manage crash energy, while the cover is primarily cosmetic.