CAADE CAADE Vehicle Safety Systems and Technology Questions and Answers 2

Question 1

What is the purpose of a static ADAS calibration versus a dynamic ADAS calibration?

Accepted Answer

Static is performed in a controlled indoor environment with targets; dynamic is performed while driving at specified speeds

Answer

Static uses a scan tool; dynamic uses a test drive only

Answer

Static applies to cameras only; dynamic applies to radar only

Answer

Static is done post-paint; dynamic is done pre-paint

Question 2

A vehicle has lane-keeping assist (LKA). After a front-end collision repair, what step must be documented in the repair estimate?

Accepted Answer

ADAS recalibration and verification scan

Answer

Replacement of the steering rack

Answer

Replacement of all four tires

Answer

Fuel system inspection

Question 3

Which of the following correctly describes the role of a crash data recorder (CDR/EDR) in a damage appraisal?

Accepted Answer

It stores pre-crash speed, braking, and seatbelt status data useful for liability and severity assessment

Answer

It determines paint color codes

Answer

It controls airbag inflation timing in real time

Answer

It logs fuel consumption data only

Question 4

After replacing a front bumper on a vehicle with an automatic emergency braking (AEB) system, what must the appraiser note as a required repair step?

Accepted Answer

Recalibrate the front radar sensor to manufacturer specifications

Answer

Replace brake pads and rotors

Answer

Flush brake fluid

Answer

Replace the ABS module

Question 5

What is the significance of a 'supplemental restraint system' (SRS) warning light remaining on after collision repairs?

Accepted Answer

It indicates an unresolved fault in the airbag or seat belt system that could prevent deployment in a future crash

Answer

It indicates a minor electrical glitch that clears itself

Answer

It means the battery needs replacement

Answer

It signals the need for an oil change

Question 6

Which tool is used to retrieve and document airbag control module fault codes during a collision damage appraisal?

Accepted Answer

Diagnostic scan tool (OBD-II scanner with SRS capability)

Answer

Infrared thermometer

Answer

Paint thickness gauge

Answer

Ultrasonic measuring system