Practice Test GeeksC2 Practice Test
← All C2 Flashcard Decks

Safety and Compliance Flashcards

7 cards from real C2 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety and Compliance flashcards as text

  1. During a fire extinguisher inspection, a technician finds the pressure gauge needle in the green zone but the pull pin is missing. What is the correct action?

    Answer: Tag it out of service and replace the pin before returning to use

    A missing pull pin means the extinguisher cannot function safely and must be taken out of service until repaired with a new pin and tamper seal.

  2. Which regulation requires employers with 100 or more employees to electronically submit their OSHA 300A summary data annually?

    Answer: 29 CFR 1904.41

    29 CFR 1904.41 requires establishments with 100 or more employees in high-hazard industries to electronically submit OSHA 300A summary data each year.

  3. What is the maximum permissible noise exposure level (PEL) for an 8-hour workday according to OSHA?

    Answer: 90 dBA

    OSHA's PEL for noise exposure is 90 dBA as an 8-hour time-weighted average; employers must implement controls when this level is reached or exceeded.

  4. An employee's respirator fit test result is marginal. According to OSHA's Respiratory Protection Standard, this employee:

    Answer: Must be retested with a different respirator model until an adequate fit is achieved

    If a fit test fails, OSHA requires the employer to try different respirator models or sizes until the employee achieves an adequate fit before exposure.

  5. Under RCRA, a facility generating between 100 and 1,000 kilograms of hazardous waste per month is classified as which type of generator?

    Answer: Small Quantity Generator (SQG)

    RCRA classifies facilities generating 100–1,000 kg/month of hazardous waste as Small Quantity Generators (SQGs) with intermediate regulatory requirements.

  6. Which document is required to accompany a hazardous waste shipment from the point of generation to the treatment, storage, or disposal facility?

    Answer: Uniform Hazardous Waste Manifest

    The Uniform Hazardous Waste Manifest is the federally required tracking document that must accompany all off-site hazardous waste shipments under RCRA.

  7. A walking surface must be capable of supporting how many times the maximum intended load, according to OSHA general industry standards?

    Answer: 4 times

    OSHA requires that floors and walking surfaces support at least four times the maximum intended load to provide an adequate safety factor.