Runway Incursion Prevention Flashcards
7 cards from real AVOP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Runway Incursion Prevention flashcards as text
What is the purpose of Runway Status Lights (RWSL)?
Answer: To provide an automatic, independent warning system that illuminates red lights when the runway is unsafe to enter or cross
Runway Status Lights are an FAA-developed safety system that automatically displays red in-pavement lights when sensor data determines that the runway is unsafe to enter or cross.
During low visibility operations (LVO) on the airside, what is a key additional precaution for vehicle operators?
Answer: Reduce speed, use radio communications more frequently, and confirm position before proceeding across any holding point
Low visibility conditions increase the risk of disorientation and incursions, so operators must slow down, communicate more actively with ATC, and verify their position before crossing any runway holding point.
What does a flashing white light signal from the ATC tower mean to a vehicle operator in the movement area?
Answer: Return to the starting point on the airport
A flashing white light directed at a vehicle on the airside means to return to the starting point on the airport.
What immediate action should a vehicle operator take upon hearing 'STOP STOP STOP' transmitted on the ATC frequency?
Answer: Immediately stop the vehicle in place without question
An emergency stop call requires all vehicles to stop immediately without hesitation or confirmation — every second matters in preventing a runway incursion collision.
What is the recommended action when a vehicle operator becomes unsure of their position on the airfield at night or in reduced visibility?
Answer: Stop the vehicle in a safe place and contact ATC for guidance
Stopping in a safe location and contacting ATC for guidance is the safest response to positional uncertainty — continuing without knowing your location greatly increases incursion risk.
Which of the following best describes a 'surface incident' as distinguished from a runway incursion?
Answer: An event where a vehicle or aircraft incorrectly enters a taxiway or apron area without authorization but does not involve a runway
A surface incident is an unauthorized or incorrect presence on a taxiway or other non-runway surface area, distinct from a runway incursion which specifically involves the runway protected area.
What is the significance of reading back an ATC runway crossing clearance?
Answer: It confirms mutual understanding between ATC and the vehicle operator and allows ATC to correct any error before the crossing
Reading back ATC clearances, including runway crossing instructions, creates a closed communication loop that allows ATC to catch and correct any misunderstanding before the vehicle enters the runway.