Practice Test GeeksAVOP - Airside Vehicle Operator's Permit Practice Test
← All AVOP Flashcard Decks

Radiotelephone Communications Flashcards

6 cards from real AVOP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Radiotelephone Communications flashcards as text

  1. When communicating with Air Traffic Control (ATC), which of the following is the correct way to state your vehicle identification 'Maintenance 3' and your location 'Taxiway G'?

    Answer: "Ground, Maintenance 3, Taxiway G."

    Standard radiotelephony procedure requires you to state the station you are calling (Ground), followed by your call sign (Maintenance 3), and then your location (Taxiway G). This format is clear, concise, and follows established aviation communication protocols.

  2. You receive an instruction from the Ground Controller to "HOLD SHORT OF RUNWAY 27." What is the mandatory readback for this instruction?

    Answer: "Vehicle 12, HOLD SHORT OF RUNWAY 27."

    Any instruction to hold short of a runway is a critical, safety-related command that must be read back verbatim, including your vehicle's call sign. This confirms to ATC that you have received and correctly understood the instruction, which is crucial for preventing runway incursions.

  3. To avoid confusion with similar-sounding letters over the radio, the ICAO phonetic alphabet is used. How would you correctly spell out "TAXIWAY B9"?

    Answer: "TAXIWAY, BRAVO, NINER."

    The word "Taxiway" is standard and does not need to be spelled out. The letter 'B' is "Bravo" in the ICAO phonetic alphabet, and the number '9' is pronounced "Niner" to avoid confusion with the number '5' (Fife).

  4. You are in your vehicle, 'Ops 5', on a service road and need to cross Taxiway Charlie to reach the terminal. Which initial transmission is most correct and professional?

    Answer: "Ground, Ops 5, service road near Taxiway Charlie, request to cross Taxiway Charlie to the terminal."

    This transmission clearly identifies the station being called (Ground), your call sign (Ops 5), your current location (service road near Taxiway Charlie), and your specific request/intention (cross Taxiway Charlie to the terminal). It is concise yet provides all the necessary information for ATC to make a decision.

  5. While listening to the ground control frequency, you hear ATC give an instruction followed by your call sign. However, the transmission was garbled and you are unsure of the instruction. What is the correct response?

    Answer: "SAY AGAIN."

    The standard phrase to request a repeat of a transmission is "SAY AGAIN." It is universally understood in aviation communications to mean "repeat your last transmission." Never proceed if you are uncertain of an instruction, and do not use non-standard phrases. "WILCO" means "I will comply" and would be incorrect if you did not understand the instruction.

  6. What is the primary purpose of using standardized radiotelephony phraseology, such as "AFFIRMATIVE" instead of "Yes," on the airside?

    Answer: To prevent misunderstandings that can arise from non-standard or ambiguous language.

    Standard phraseology has been developed to be as clear and concise as possible, ensuring that messages are understood correctly by all parties, regardless of accent or background noise. Using globally recognized phrases like "AFFIRMATIVE" (for Yes) or "NEGATIVE" (for No) eliminates ambiguity and greatly enhances safety by preventing misinterpretation of critical instructions.