Airside Zones and Communications Flashcards
6 cards from real AVOP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Airside Zones and Communications flashcards as text
What is the difference between ground control and tower frequencies?
Answer: Ground handles taxiway movements, tower controls runway operations
Ground control manages taxiway traffic; tower manages runway operations.
What communication requirements apply in the non-movement area?
Answer: ATC not required but must follow ramp control procedures
The non-movement area does not require ATC but does require following ramp control procedures.
What is ATIS?
Answer: Automatic Terminal Information Service with weather and operational info
ATIS provides continuously updated weather, active runways, and NOTAMs.
Which zone requires continuous two-way radio communication with ATC?
Answer: Movement area
The movement area requires continuous radio communication.
What is the proper procedure for switching from ground to tower frequency?
Answer: Acknowledge, read back frequency, switch, and contact new controller
Acknowledge the handoff, read back the frequency, switch, then make initial contact.
What is the significance of the movement/non-movement boundary for communications?
Answer: Marks where ATC communication becomes mandatory
The boundary is where ATC communication becomes mandatory for vehicle operations.