ASME ASME Pressure Testing and Inspection

Question 1

Under ASME Section VIII Division 1, what is the minimum required hydrostatic test pressure for a new pressure vessel?

Accepted Answer

1.25 times the MAWP adjusted for temperature

Answer

1.1 times the MAWP

Answer

1.5 times the MAWP

Answer

2.0 times the MAWP

Question 2

Which ASME standard governs the inspection of pressure vessels in continued service (in-service)?

Accepted Answer

API 510

Answer

ASME Section VIII

Answer

ASME Section V

Answer

ASME Section XI

Question 3

In ASME nondestructive examination, which NDE method is BEST suited for detecting surface-breaking cracks in ferromagnetic materials?

Accepted Answer

Magnetic Particle Testing (MT)

Answer

Radiographic Testing (RT)

Answer

Ultrasonic Testing (UT)

Answer

Liquid Penetrant Testing (PT)

Question 4

Under ASME Section V, what is the purpose of a 'written procedure' for nondestructive examination?

Accepted Answer

To establish and control the technique variables ensuring repeatable and reliable examination results

Answer

To record the results of each NDE examination

Answer

To document that the NDE technician has been qualified by the employer

Answer

To report indications to the Authorized Inspector

Question 5

What is the minimum required qualification level for an RT film interpreter under ASME Section V and SNT-TC-1A?

Accepted Answer

Level II

Answer

Level I

Answer

Level III

Answer

Any certified level is acceptable

Question 6

Under ASME Section VIII, which type of weld joint receives the highest allowable efficiency (E = 1.0)?

Accepted Answer

Double-welded butt joint with 100% radiographic examination

Answer

Single-welded butt joint without backing strip

Answer

Single-welded butt joint with backing strip

Answer

Full penetration corner joint