Arkansas Driver's License Flashcards
11 cards from real Arkansas License Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 11 Arkansas Driver's License flashcards as text
If you can't see more than 200 feet ahead in bad weather conditions, don't drive faster than
Answer: 30 mph.
In Arkansas, if visibility is reduced to 200 feet or less due to bad weather, drivers should not exceed 30 mph. This rule is crucial for safety, as it allows drivers more time to react to hazards that may appear suddenly in low visibility conditions. Reducing speed significantly decreases stopping distance and improves reaction time.
When driving on a highway and your engine dies, what should you do?
Answer: Hold onto the wheel firmly and get off the highway.
If your engine dies on a highway, it's critical to hold onto the steering wheel firmly and guide the vehicle off the highway. Power steering and power brakes may become inoperable or require significantly more effort, so maintaining control of the vehicle's direction is paramount to safely pulling over. Hitting the brakes hard could cause a loss of control or a rear-end collision.
On a hot day, be cautious if it starts to rain because the pavement could become slippery for a short while. This is because
Answer: oil in the asphalt.
On a hot day, the pavement can become very slippery when it first starts to rain due to oil in the asphalt. Heat causes oils and grease from vehicles and the road surface itself to rise. When rain begins, this oil mixes with the water, creating a slick film before the rain has a chance to wash it away, significantly reducing tire traction.
Make sure the head restraint touches the back of the head when adjusting the headrests. This prevents
Answer: neck injuries if you are hit from behind.
Adjusting the head restraint so it touches the back of the head is essential for preventing neck injuries, particularly whiplash, if you are hit from behind. In a rear-end collision, the head restraint limits the backward movement of your head, reducing the strain on your neck. Proper adjustment ensures maximum protection during such impacts.
When passing a motorcycle, you should
Answer: pass in an adjacent lane.
When passing a motorcycle, it is crucial to treat it as a full-sized vehicle entitled to its entire lane. Passing in an adjacent lane ensures you provide ample space, preventing the risk of forcing the motorcycle off the road or into an unsafe position. This practice promotes safety by minimizing the chance of a collision and respecting the motorcyclist's right to a safe operating space.
Before making a right turn at an intersection, make sure there is no oncoming traffic
Answer: from your left and no oncoming traffic turning left into your path.
Before making a right turn, you must primarily check for traffic coming from your left, as they typically have the right-of-way and could enter your path. Additionally, it's important to watch for oncoming traffic that might be turning left into the same lane you intend to enter. Checking these two specific traffic flows ensures you can complete your turn safely without conflicting with other vehicles.
What's the meaning of this sign?
Answer: Avoid making a U-turn.
A road sign depicting a U-turn arrow with a red circle and a diagonal line through it is a universal regulatory symbol. This sign indicates a prohibition, meaning that U-turns are not permitted at this specific location. Drivers must obey this sign to maintain traffic flow and prevent dangerous maneuvers.
If work zones do not have signs indicating reduced speed limits, you should
Answer: obey the normal posted speed limit.
In work zones, drivers are legally required to obey the normal posted speed limit unless specific signs indicate a reduced speed limit. While caution is always advised in construction areas, a lower speed limit is only enforceable if it is clearly posted. Always be prepared to adjust your speed based on conditions, but the normal limit applies without specific signage.
What should you do if an incoming vehicle is on your immediate left and you are going to pass a bicycle on your right?
Answer: Reduce speed and give way to the oncoming vehicle.
In this complex scenario, safety is paramount. Reducing your speed and giving way to the oncoming vehicle on your left allows you to create necessary space and time to safely assess the situation. This prevents you from being caught between the oncoming vehicle and the bicycle, ensuring you can pass the cyclist with ample room once the left lane is clear and safe.
What's the meaning of this sign?
Answer: A flagger is stationed to manage traffic at a construction zone.
A warning sign depicting a person holding a flag is commonly used to alert drivers to the presence of a flagger ahead. Flaggers are typically stationed in construction or maintenance work zones to control traffic flow, ensure worker safety, and guide vehicles safely through temporary road changes. This sign specifically indicates that a flagger is present in a work zone to manage traffic.
If you are within _______ of a hill or curve at 55 mph, you are not allowed to pass.
Answer: one-third of a mile
Arkansas driving laws prohibit passing when approaching within one-third of a mile of the top of a hill or a curve if traveling at 55 mph. This regulation is crucial for safety, as visibility is severely limited in these areas, making it unsafe to determine if the opposing lane is clear for passing. Adhering to this rule prevents head-on collisions due to obstructed views.