Interior Architecture and Space Planning Flashcards
7 cards from real Architecture practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Interior Architecture and Space Planning flashcards as text
What is the primary purpose of a 'space program' in the architectural design process?
Answer: To document the required spaces, areas, and functional relationships needed by the client
A space program documents each space required by the client, including its size, function, and relationships to other spaces, serving as the foundation for design.
In space planning, 'net square footage' refers to:
Answer: The usable floor area within a space, measured from the interior face of walls
Net square footage measures only the usable floor area within a space, excluding walls, columns, and other non-usable elements.
In commercial real estate space planning, the 'load factor' (also called 'add-on factor') represents:
Answer: The difference between rentable and usable square footage expressed as a percentage
The load factor represents the tenant's proportionate share of building common areas (lobbies, corridors, restrooms) added to usable area to determine rentable area.
In the early stages of architectural programming, 'bubble diagrams' are primarily used to:
Answer: Illustrate functional relationships and adjacencies between spaces
Bubble diagrams are schematic tools used to show how spaces relate to and connect with each other before any dimensional planning occurs.
An 'adjacency matrix' in architectural programming is used to:
Answer: Evaluate and prioritize which spaces need to be located close to each other
An adjacency matrix organizes spatial relationships by rating how important it is for pairs of spaces to be located near each other based on functional requirements.
In office space planning, 'hoteling' refers to:
Answer: A strategy where workstations are reserved on-demand rather than permanently assigned to individuals
Hoteling allows multiple employees to share workstations by reserving them as needed, reducing total space requirements when workers are frequently out of the office.
Per the International Building Code (IBC), the minimum clear width for corridors serving an occupant load of 50 or more in a commercial office building is:
Answer: 44 inches
IBC requires a minimum corridor width of 44 inches when serving an occupant load of 50 or more, ensuring adequate egress capacity during an emergency.