Practice Test Geeks(API 510) Certified Pressure Vessel Inspector Practice Test
← All API 510 Flashcard Decks

API 510 Welding Procedures and Qualifications Flashcards

6 cards from real API 510 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 API 510 Welding Procedures and Qualifications flashcards as text

  1. What NDE method is most commonly specified to verify weld quality in full-penetration butt welds on pressure vessels per ASME Section VIII?

    Answer: Radiographic testing (RT)

    Radiographic testing is the most commonly specified volumetric method for verifying internal weld quality in full-penetration butt welds per ASME Section VIII.

  2. Under API 510, if a weld repair is made to a vessel in lethal service, what examination requirement applies?

    Answer: 100% radiographic examination of all butt welds

    Lethal service vessels require 100% radiographic examination of all butt welds to ensure the highest level of weld integrity.

  3. What is the significance of the joint efficiency factor 'E' in pressure vessel repair calculations?

    Answer: It reflects the quality and degree of examination applied to welded joints

    The joint efficiency factor E accounts for weld quality through the extent of radiographic or ultrasonic examination, directly affecting the allowable working pressure calculation.

  4. In API 510, which organization issues the standard that defines welder performance qualification continuity requirements?

    Answer: ASME (American Society of Mechanical Engineers)

    ASME Section IX is the standard referenced by API 510 for defining welder performance qualification, including continuity requirements.

  5. What is required when a welder changes from one welding position to another position not covered by their qualification?

    Answer: Requalification in the new position

    Welding position is an essential variable; a welder must qualify in each position they intend to use, and changing to an unqualified position requires requalification.

  6. Under API 510, which document authorizes a repair organization to perform repairs and alterations on ASME-coded pressure vessels?

    Answer: National Board R-Stamp authorization

    The National Board R-Stamp authorizes a repair organization to perform repairs and alterations on pressure vessels in accordance with the National Board Inspection Code (NBIC).